Thread Number: 12364
Norge Progress |
[Down to Last] |
Post# 217096   6/20/2007 at 08:42 (6,148 days old) by westyslantfront ()   |   | |
Checkrate/Likes
 
     
Here is a shot of the Norge at Dr. Manny's shop. He found the cause of the short and repaired it. Timer is OK. He had to rebuild water valve, and is painting cabinet. |
|
Post# 217097 , Reply# 1   6/20/2007 at 08:44 (6,148 days old) by westyslantfront ()   |   | |
Checkrate/Likes
 
     
Here is Manny with Norge Lid. My '51 Westinghouse is there awaiting repairs and a new boot. |
Post# 217098 , Reply# 2   6/20/2007 at 08:45 (6,148 days old) by westyslantfront ()   |   | |
Checkrate/Likes
 
     
Another shot of the Westinghouse |
Post# 217101 , Reply# 3   6/20/2007 at 08:46 (6,148 days old) by westyslantfront ()   |   | |
Checkrate/Likes
 
     
Here is a shot of the Norge from the back. |
Post# 217102 , Reply# 4   6/20/2007 at 08:47 (6,148 days old) by westyslantfront ()   |   | |
Checkrate/Likes
 
     
Newly rebuilt Norge water valve. |
Post# 217103 , Reply# 5   6/20/2007 at 08:49 (6,148 days old) by westyslantfront ()   |   | |
Checkrate/Likes
 
     
Norge top with Timeline upside down. |
Post# 217106 , Reply# 6   6/20/2007 at 08:52 (6,148 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
|
Post# 217124 , Reply# 7   6/20/2007 at 09:53 (6,148 days old) by westyslantfront ()   |   | |
Checkrate/Likes
 
     
Hi Jon. The only boot possible is the early '80's White Westinghouse gray boot, just like the one Greg Nunn used. That is major surgery as Manny said he has to take the machine half apart. Ross |
Post# 217136 , Reply# 8   6/20/2007 at 11:34 (6,148 days old) by christfr (st louis mo)   |   | |
Checkrate/Likes
 
     
|
Post# 217142 , Reply# 9   6/20/2007 at 11:52 (6,148 days old) by filterflo (Chicago Area)   |   | |
Checkrate/Likes
 
     
Good luck with your Norge progess, Ross. Great pictures. Those Norge's have the neatest looking tubs. What a piece of craftsmanship compared to tubs in modern washers that are mostly molded plastic. |
Post# 217145 , Reply# 10   6/20/2007 at 12:34 (6,148 days old) by peteski50 (New York)   |   | |
Checkrate/Likes
 
     
|
Post# 217165 , Reply# 11   6/20/2007 at 15:06 (6,147 days old) by peterh770 (Marietta, GA)   |   | |
Checkrate/Likes
 
     
|