|
Thread Number: 15892
Miele Softtronic W457E |
[Down to Last] |  |
| Post# 265999 2/21/2008 at 10:10 (5,901 days old) by timon90 (Norway) | ||
 | ||
|
| Post# 266001 , Reply# 1 2/21/2008 at 10:15 (5,901 days old) by jaxsunst () | ||
|
It really depends on how much a new electronic card would cost. | ||
| Post# 266003 , Reply# 2 2/21/2008 at 10:41 (5,901 days old) by timon90 (Norway) | ||
|
| ||
Post# 266044 , Reply# 3 2/21/2008 at 15:11 (5,901 days old) by foraloysius  (Leeuwarden, Friesland, the Netherlands) |
||
 | ||
| Post# 266153 , Reply# 4 2/22/2008 at 05:23 (5,900 days old) by timon90 (Norway) | ||
|
| ||
|
Post# 266276 , Reply# 5 2/23/2008 at 03:29 (5,900 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands) |
||
|
| ||
| Post# 266487 , Reply# 6 2/25/2008 at 01:51 (5,898 days old) by timon90 (Norway) | ||
|
Well, I bougt the machine, and got it home yesterday. I've been able to run a cycle, but then I MUST have the power to the drainingpump disconnected. If not, the pump runs continously. But the programme and cycles is as they should. Looked if there is a overflow protection at the bottom, but it's not. Any here who have any idea, or know if there is a testprogram or something like that I can run to check the components?
| ||
| Post# 266489 , Reply# 7 2/25/2008 at 01:59 (5,898 days old) by timon90 (Norway) | ||
|
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
