Thread Number: 1607
The Pink Maytag |
[Down to Last] |
Post# 60816   3/21/2005 at 18:05 (6,947 days old) by cadman (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
Fresh from the St. Vincent DePaul warehouse! A pink Maytag 740C- with backlit controls, a drum light, and an ozone lamp! Not the greatest of shape, a mouse chose the lint screen as his home, and there's some streaking from what I would guess is bleach, but it's 50's, and it's pink. I've got the timer disc inside, it's in two pieces but shouldn't be bad to epoxy. Anyone got a spare? BTW, this one is Ben's find. Interesting they used copper below the glass... |
|
Post# 60818 , Reply# 1   3/21/2005 at 18:21 (6,947 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 60829 , Reply# 2   3/21/2005 at 20:32 (6,947 days old) by retromom ()   |   | |
Checkrate/Likes
 
     
What a terrific little dryer! I just can't imagine anyone giving this one away! Ok, dumb question department.....just what is that little drawer for? Venus (the uneducated) |
Post# 60832 , Reply# 3   3/21/2005 at 20:44 (6,947 days old) by swestoyz (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
Thanks to the little mouse that decided to consider the Maytag a prime piece of realestate, its original purpose was designed to be a lint trap. Well, lets just say it hasn't trapped lint in quite some time. I think Cory can work some magic with some screen from the hardware store, along with some needed nuts and bolts for the right side. This is the first unit that will actually need some real elbow greese, a few weekends, and a couple of cold ones for us to get going. So do I even ask if parts are available for this unit? Ben |
Post# 60835 , Reply# 4   3/21/2005 at 20:57 (6,947 days old) by rickr (.)   |   | |
Checkrate/Likes
 
     
|
Post# 60838 , Reply# 6   3/21/2005 at 21:09 (6,947 days old) by swestoyz (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
The pilot light door is missing from the top of the unit. We were kinda in a hurry to move the thing (hum... they did said just take it), and didn't look around to find it. Does anyone have a photo of what it would look like with the missing piece on the top? The bottom door is for a the lint filter (or mouse nest).
|
Post# 60842 , Reply# 7   3/21/2005 at 21:15 (6,947 days old) by bethann (Indianapolis)   |   | |
Checkrate/Likes
 
     
Now your talkin my color! I guess this is going to be a daily thing for you two! Can I put in my order? |
Post# 60843 , Reply# 8   3/21/2005 at 21:15 (6,947 days old) by veg-o-matic (Baltimore, Hon!)   |   | |
Checkrate/Likes
 
     
|
Post# 60859 , Reply# 11   3/21/2005 at 22:03 (6,947 days old) by Unimatic1140 (Minneapolis)   |   | |
Checkrate/Likes
 
     
|
Post# 60870 , Reply# 12   3/21/2005 at 23:37 (6,947 days old) by gansky1 (Omaha, The Home of the TV Dinner!)   |   | |
Checkrate/Likes
 
     
Wow - very good find! This is actually quite an interesting model. Maytag made this dryer for only a year or two before the Halo-of-Heat models came out in 1958-59. I believe this dryer has an electic ignition, the last non-standing pilot gas model until the Big-Load models came out in 1975. The small door on the top is for access to the gas valve and electric ignition controls I think... I would be surprised if it weren't as with a standing pilot at the top of the cabinet like that, the paint on the control panel glass would be completely destroyed. This happend on many gas models of later vintage, the heat and fumes from the pilot destroyed everything inside. I have parts manual for this model so I can check for sure. I do know where you can get this exact same dryer, in pink no less, and not too awfully far from you guys. Email me as I think I have the business name around here somewhere. The dryer was complete with all the doors, screen drawer and black dial. They used to have the matching washer, but junked it when it started to leak oil.
|
Post# 61095 , Reply# 15   3/23/2005 at 19:01 (6,945 days old) by swestoyz (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
This afternoon after work, Cory and I dug into the Maytag in atempts to get most of the nesting out before taking her downstairs. Cory did some polishing of the chrome, and I worked on the dirty stuff. I pulled out a good size rug's worth of yarn in the lint housing, plus the rest of a typical mouse nest. I did most of the cleaning through the front little lint door, not realizing that you could take a section of the drum out, align it with the lint housing for complete access! Got all of the pulleys lose and the belts free, checked the bearings on the blower, did some final vacuuming of the interior. I decided it was time, so Cory plugged her in. At first, there was nothing, then the control panel light came to life! After putting the door back on and closing the handle, the motor sprung to life, delightfully exciting the both of us! The timer doesn't work, due to the infamous mouse chewing threw the housing. We pulled the original 40w and ozone, and replaced with new. Unfortunately, the replacement appliance bulb was not 40w, and blew out a NOS ozone bulb in about 5 minutes. Good thing Cory has some more on stock. Tomorrow she will hit the basement, in hopes of getting most of it functional. More photos to come... PS - Goatfarmer, all I know is the timer dial is black, and has etched out numbering for a light to shine through. |
Post# 61103 , Reply# 16   3/23/2005 at 19:46 (6,945 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
|