Thread Number: 16200
Solid Tubs from the 50's and 60's
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 269752   3/15/2008 at 13:08 (5,882 days old) by saltysam ()        

Hi everyone, I am curious if anyone has taken apart a solid tub from a frigidaire or other solid tub machine? I know the solid tubs had a much thicker ring around the top that had rubber plug where the ballast material was added. Does anyone know what was used as the ballast? Water, glycol mixture, some sort of jel? I know what the ballast does (helps ballance out the tub during spin) but i am curious as to what kind of material was used....
Mark





Post# 269812 , Reply# 1   3/15/2008 at 16:12 (5,882 days old) by rickr (.)        

rickr's profile picture
Frigidaire used metal shavings from the shops in the factory.

Post# 269859 , Reply# 2   3/15/2008 at 21:24 (5,882 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture
Frigidaire used metal shavings, Maytag used oil, many others used a solid metal ring mounted near the top of the tub such as this Norge Tub (slightly rusty part).

Post# 269860 , Reply# 3   3/15/2008 at 21:24 (5,882 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture
Maytag Filled the Balance Ring with oil...

Post# 269861 , Reply# 4   3/15/2008 at 21:29 (5,882 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture
Early Frigidaire washers (1947, 1948 and 1949) used a Harmonizer bolted under the double spin tubs, it was made up of a very HEAVY lead ring mounted to spiral metal springs.

Post# 269870 , Reply# 5   3/15/2008 at 21:46 (5,882 days old) by gansky1 (Omaha, The Home of the TV Dinner!)        

gansky1's profile picture
Maytag later went to using concrete in their balance ring, like Hotpoint and others. All those DD Whirlpool and Kenmores out there with sea-water in their rings - probably could fill a lake.

Post# 269873 , Reply# 6   3/15/2008 at 21:59 (5,882 days old) by rickr (.)        

rickr's profile picture
Those pixs are a trip! Thanks for posting those Robert. Most of us would have no clue what those looked like.

Post# 269874 , Reply# 7   3/15/2008 at 22:05 (5,882 days old) by rickr (.)        

rickr's profile picture
The early Frigidaire is really cool! That must have added a few coins to the price of the machine to produce that type of a balance system.

Post# 269932 , Reply# 8   3/16/2008 at 09:52 (5,881 days old) by saltysam ()        
Wow!

Thanks for the information guys.....now i know......i have thought about this many times but didn't dare remove the plug from one of my machines to find out. Robert, those pics are cool! Thanks!
Mark


Post# 269933 , Reply# 9   3/16/2008 at 09:58 (5,881 days old) by bajaespuma (Connecticut)        
great pictures but you forgot something...

bajaespuma's profile picture
What was inside the GE balance ring? I remember looking at that waxy looking plug and always being tempted to remove it (oh Toggle, I hope you're not reading this thread)but I knew I'd catch hell.

Post# 269950 , Reply# 10   3/16/2008 at 11:30 (5,881 days old) by spinout (Phoenix)        
Balance rings

My '67 Hotpoint uses a heavy mortar that has been cast into the ring.

Post# 269980 , Reply# 11   3/16/2008 at 12:34 (5,881 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture
great pictures but you forgot something...

Well then, the earliest GE washers used a large cast iron cradle that the wash basket sits in...


Post# 269981 , Reply# 12   3/16/2008 at 12:36 (5,881 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture
Then later on the GE mounted a Cast iron ring covered in thick rubber on top of the tub. After that I believe they molded the ring to the porcelain tub and filled it with metal shavings just like Frigidaire.

Post# 270461 , Reply# 13   3/18/2008 at 06:27 (5,879 days old) by christfr (st louis mo)        

christfr's profile picture
come on mark show us a pic of the cow.. i know she is up and runnin

Post# 271063 , Reply# 14   3/20/2008 at 21:21 (5,877 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)        
NON3SENS3!

jetcone's profile picture
Everyone Knows what ALL the manufacturers used for balance material in the 1950's..it was quite common then but getting scarce today.

They used spent uranium from all the missile silos! Cheap germ free and plentiful!

Cast iron yeah right.....



Post# 271245 , Reply# 15   3/21/2008 at 15:38 (5,876 days old) by johnb300m (Chicago)        

johnb300m's profile picture
are you.......serious???

Post# 271260 , Reply# 16   3/21/2008 at 16:52 (5,876 days old) by mickeyd (Hamburg NY)        
What beautiful pictures

mickeyd's profile picture
so that's what a harmonizer is-- my my my !--what a mouthful.

Love the fuscia/mauve of the GE ring & cap. So Easter Eggy

Johnb, Jetcone is a former Merry Prankster from the Ken Kesey 60's, and he is wonderfully radioactive;'D



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy