Thread Number: 16281
KitchenAid KD-12 in Long Beach California
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 270864   3/19/2008 at 22:44 (5,875 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture


contact: jdmacl@aol.com





Post# 270865 , Reply# 1   3/19/2008 at 22:44 (5,875 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture
2

Post# 270869 , Reply# 2   3/19/2008 at 23:13 (5,875 days old) by bobbins (Victoria, BC, Canada)        

Gosh I wish I can get my hands on one of these!!! These KA are a gem...humm wonder what it will cost to ship???

Bob


Post# 270878 , Reply# 3   3/20/2008 at 05:13 (5,875 days old) by stainfighter (Columbia, SC)        
you might need a loan...

stainfighter's profile picture
:-)
since it is a TANK...
but you could try "you crate" freight.
I really liked the service we received from Highway Freight for our RCA Whirlpool Dryer and would use them again...


Post# 270890 , Reply# 4   3/20/2008 at 07:45 (5,874 days old) by spiceman1957 ()        
Re: KitchenAid KD-12

Unimatic,

Like the picture you posted, its looks like it been used very little. Is this a commerical dishwasher? I remember seeing one like this at our local corner drug store when I was a kid. It was in the soda counter and remember often seeing it been unloaded (talk about HOT steam coming out of it).



Post# 270894 , Reply# 5   3/20/2008 at 08:17 (5,874 days old) by unimatic1140 (Minneapolis)        

unimatic1140's profile picture
Now that's a home model, the Commercial machines only have a bottom rack and a five minute or so cycle.

Post# 270970 , Reply# 6   3/20/2008 at 14:12 (5,874 days old) by retro-man (- boston,ma)        

Was this built into a cabinet before or was it part of a sink and dishwasher combo or was it a portable unit. Cannot tell from the pics. What year would this have been from?
Jon


Post# 271065 , Reply# 7   3/20/2008 at 21:36 (5,874 days old) by stevet (West Melbourne, FL)        
Getting some facts straight!

Spiceman,
The Hobart machine you had in the Drugstore was definitely a commercial unit and was a model UM.(undercounter machine)It accommodated only one rack in it for dishware and came with a silverware rack that fit into a slot in the front or back which looks very much like the one in the picture except it did not have the pegs to hold the dishes but rather a series of bars from side to side so the dishware would sit between the wire bars of the rack. It also came with a flat half sized basket which was to be used for cups and glasses. For the record, the original machines came with horizontally mounted motors and went to the vertical motors we are all more used to seeing. Also, that machine may have also come with a porcelain coated tank since the stainless commercial tanks were also a later modification primarily for sanitary reasons. The Stainless never wore out but the porcelain did especially with the commercial soap products. The cycle was a bit over 3 minutes and the machines required some source of 180 degree water until they started making units which used bleach or iodine to sanitize.

The KD12 series machine above appears to be a built in model and not part of a sink combination and the production run for that model was June of 1957 thru October 1960. (thanks to Gansky)
If the unit pictured has a drain pump then it can be installed just about anywhere. If it doesn't, then it needs to be a connected to a gravity drain either under the machine or behind it but very low to the ground.
The model number will spell it out. If the model is KD-12 it is a gravity drain. The KD-12P is the one with the pump and can be attached to your sink or garbage disposer.
It should also clean the dishes and dry them in less than an hour and do a damned good job of it too.

Hope this helps everyone.


Post# 271066 , Reply# 8   3/20/2008 at 21:46 (5,874 days old) by danemodsandy (The Bramford, Apt. 7-E)        
WHY???

danemodsandy's profile picture
Must they always be on the other side of the freakin' country?

WAHHHHHHH!


Post# 271199 , Reply# 9   3/21/2008 at 11:31 (5,873 days old) by retro-man (- boston,ma)        

Thanks stevet for the information. Brought back some memories of the drug store lunch counter with that unit that you mentioned built into the counter. Man I remember when they opened the door after the 3 minute cycle, the amount of steam that was released. Also the rack I had forgotten about with the rows of wire bars where the plates would be loaded. Thanks again.
Jon


Post# 271217 , Reply# 10   3/21/2008 at 13:31 (5,873 days old) by rp2813 (Sannazay)        

rp2813's profile picture
Hey Bob, if you've got a vehicle that can haul it, why not make a road trip out of it and pick it up yourself? Two (sort of long) days each direction will do it and even with the cost of gas food & lodging (maybe an AW member along the route can put you up for a night?) it could be cheaper than shipping. And the LA area is always fun to visit.

Or you can wait for Dan in Seattle to find one for you. He seems to score great stuff out there all the time and would probably be happy to notify you if he comes across one of these.

Ralph


Post# 271238 , Reply# 11   3/21/2008 at 15:04 (5,873 days old) by jons1077 (Vancouver, Washington, USA)        
Someone needs to get it!

jons1077's profile picture
Imagine how clean your dishes will be. I bet it could almost take the white off of a plate!



Post# 271345 , Reply# 12   3/22/2008 at 07:48 (5,872 days old) by stevet (West Melbourne, FL)        
More than just the white!

Jons,
If you keep that machine long enough and it was used every day, it will not only take the white off your plates, it will take the porcelain off the tub!
Back around 1978 or 79, I picked up a KDS14 for 30 bucks for my cousins who had just redone their kitchen. The manufacture date of the unit was from 1962 but it looked prisitne. At the time I was working at the Hobart Office in NY and had made some good connections with some Kitchenaiders in Troy,Ohio.
We needed to obtain the custom panel trim kit to match his cabinets and one of my cronies found the last one available in the country. He sent it to me for free and I have to say it was one of the most stylish trim kits I had ever seen. But that machine just continued to amaze all of us and went on to work well past the 90's.They replaced it with a 25 series Kitchenaid Superba in the late 90's or early 2000's which they then took from that house to their new house.
The only reason that they replaced it was because nearly all the porcelain had been worn off after 40 some years of daily use, sometimes more than one use per day. The rusty looking tank was not very appealing.My cousin put it out at the curb in perfect working condition. Even the detergent and rinse agent dispensers worked like the day they went in!
I wished he had told me before he trashed it..I had wound up seeing many more of them in great condition after that at the curb, but never thought to grab one. Besides, I would have needed a helper to get it into the car. It had to weigh close to 200 lbs!
But if anyone does grab this unit, it will probably last 25 more years! It would certainly make an incredible potscrubber with the way it pumps water and today's better formulated detergents! Good machine for anyone's garage as a spare or overflow machine.



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy