Thread Number: 21222
Mike's A408 |
[Down to Last] |
Post# 334958   3/11/2009 at 19:15 (5,522 days old) by maytagmike (Burlington, Vt)   |   | |
Checkrate/Likes
 
     
Well after 6 hours of work my A408 she is up and running, I think the reason it was leaking ( from an earlier thread) the former owner had a two piece hose on the machine, smaller than what Maytag had used. I changed it out now she runs beautifully, did three loads of laundry. The Neptune TL has taken a back seat for the present time. Also the rubber feet have been hard to find. I put self adheasive felt pads on the bottom of the feet. They work beautifully. Mike
|
|
Post# 335487 , Reply# 1   3/14/2009 at 21:00 (5,519 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
The rubber feet are still available.........for now, but Whirlpool jacked up the price 4 fold. I believe they're running in the high $4 PER foot. I glued felt pads on all of my Maytag dryers since they hang out in the livingroom. Makes it MUCH easier to juggle them around on the wood floor so each one gets their fair share of use. |
Post# 335721 , Reply# 2   3/15/2009 at 20:43 (5,518 days old) by gadgetgary (Bristol,CT)   |   | |
Checkrate/Likes
 
     
|