|
Thread Number: 24275
Electra 463 Tumble dryer |
[Down to Last] |  |
| Post# 377041 9/5/2009 at 14:05 (5,339 days old) by electron1100 (England) | ||
 | ||
|
| Post# 377055 , Reply# 2 9/5/2009 at 14:59 (5,339 days old) by electron1100 (England) | ||
|
Electra lid
Hello you do realise i live in the UK. Also that the top is badly dented on the right hand side. These as far as i can remember are held on by two small plates at the front which are welded onto the top of the cabinet, and the back is just two strips of metal screwed in one end to the cabinet and the other end into the rear of the lid I will certainly measure it at work tomorrow for you Gary | ||
| Post# 377575 , Reply# 3 9/8/2009 at 13:04 (5,336 days old) by electradeluxe (Blackpool, Lancs) | ||
|
My sister in law has that dryer!! it's broken though!! | ||
| Post# 377580 , Reply# 4 9/8/2009 at 13:14 (5,336 days old) by electron1100 (England) | ||
|
Electra Dryer | ||
| Post# 377582 , Reply# 5 9/8/2009 at 13:23 (5,336 days old) by matchboxpaul (U.K) | ||
|
Think that that facia should be kept Gary - if its not too late. A really smart looking dryer once, gone to wrack and ruin. Think you make the right decision in letting it go. Paul | ||
| Post# 377588 , Reply# 6 9/8/2009 at 14:01 (5,336 days old) by electron1100 (England) | ||
|
dam | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
