|
Thread Number: 24292
Lees project |
[Down to Last] |  |
| Post# 377198 9/6/2009 at 11:26 (5,342 days old) by hotpoint95622 (Powys) | ||
 | ||
|
| Post# 377199 , Reply# 1 9/6/2009 at 11:27 (5,342 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377200 , Reply# 2 9/6/2009 at 11:28 (5,342 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377201 , Reply# 3 9/6/2009 at 11:29 (5,342 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377211 , Reply# 4 9/6/2009 at 12:56 (5,342 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377216 , Reply# 5 9/6/2009 at 13:20 (5,342 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377424 , Reply# 6 9/7/2009 at 13:03 (5,341 days old) by hotpoint95622 (Powys) | ||
|
hotpoint 95622 | ||
| Post# 377425 , Reply# 7 9/7/2009 at 13:04 (5,341 days old) by hotpoint95622 (Powys) | ||
|
hotpoint 95622 | ||
| Post# 377427 , Reply# 8 9/7/2009 at 13:06 (5,341 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377449 , Reply# 9 9/7/2009 at 13:42 (5,341 days old) by matchboxpaul (U.K) | ||
|
Blimey Lee The skill is superb and you are going to make your own facia as well. Sure will be a very interesting machine, once its all up and running. Cant wait to see what it looks like. Paul | ||
| Post# 377464 , Reply# 10 9/7/2009 at 15:39 (5,341 days old) by bertrum () | ||
|
Brilliant work Lee, Great PCB etching. Looking forward to seeing the finished article! | ||
| Post# 377476 , Reply# 11 9/7/2009 at 17:04 (5,341 days old) by vivalalavatrice () | ||
|
See-it-wash wonderful Lee! Nothing to say else that I'm curious to see it wash!! Diomede | ||
| Post# 377538 , Reply# 12 9/8/2009 at 03:42 (5,341 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377544 , Reply# 13 9/8/2009 at 08:36 (5,340 days old) by hotpoint95622 (Powys) | ||
|
lees project | ||
| Post# 377654 , Reply# 14 9/8/2009 at 21:20 (5,340 days old) by supremewhirlpol () | ||
|
You can't unsolder the switches? Nice board by the way!! | ||
| Post# 377720 , Reply# 15 9/9/2009 at 11:15 (5,339 days old) by hotpoint95622 (Powys) | ||
|
hotpoint 95622
Thank you all for your encouragement. Yes I could unsolder the switches but the tracks will be wrong and the holes too. All good practice and I did not think the first board would work anyway. Spent the day sorting the garage out and made a workbench, put the 18680 and 95622 under it out of harms way.
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
