|
Thread Number: 24505
Question about Hotpoint Liberator 1701 dryer? |
[Down to Last] |  |
|
| Post# 380320 , Reply# 1 9/21/2009 at 04:08 (5,329 days old) by chalefk5 () | ||
|
can no-one help at all? | ||
Post# 380323 , Reply# 2 9/21/2009 at 04:43 (5,329 days old) by chestermikeuk  (Rainhill *Home of the RailwayTrials* Merseyside,UK) |
||
Hotpoint Dryer
Hi Christine, you have been given a very good dryer, please note its from the seventies and may need checking for electrical saftey!! and yes you can still get parts for it!!! The holes at the rear are, the lower one with grill is the air intake, the middle one is the exhaust vent where the damp air exits after being blown through the clothes The rectangular plastic fitting (back middle)is where you need to attach a plastic flexi venting pipe, these are available universally from B&Q, alternatively please send me your details to the email ahown in my profile and I can order one through a spares supplier!!! The fluff filter is accessed by opening the door and pulling off the plate at the bag of the drum, there should be a fine mesh disc inside the cover that collects the fluff etc!!! this needs a quick clean after every drying session for best energy efficiency!!! Cheers, Mike | ||
| Post# 380397 , Reply# 5 9/21/2009 at 11:45 (5,329 days old) by matchboxpaul (U.K) | ||
|
and of the back..... with the information key: 
| ||
| Post# 381077 , Reply# 6 9/23/2009 at 19:17 (5,327 days old) by bpetersxx (laf in on the banks of the Wabash River) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
