|
Thread Number: 27150
Whirlpool |
[Down to Last] |  |
| Post# 417041 2/20/2010 at 06:41 (5,171 days old) by maytaga407 (Heber Utah) | ||
 | ||
|
| Post# 417043 , Reply# 1 2/20/2010 at 06:43 (5,171 days old) by maytaga407 (Heber Utah) | ||
|
whirlpool | ||
Post# 417098 , Reply# 3 2/20/2010 at 10:18 (5,171 days old) by appnut  (TX) |
||
 | ||
| Post# 417109 , Reply# 4 2/20/2010 at 10:34 (5,171 days old) by stainfighter (Columbia, SC) | ||
lighted controls dryer? | ||
| Post# 417122 , Reply# 5 2/20/2010 at 11:26 (5,171 days old) by dishwashercrazy (West Peoria, IL) | ||
I always try this web site first to date an appliance:
And here are the results: And they agree with "cfz2882" Brand: Whirlpool Type: Country: USA Model: LFB5300Y0 Serial: C73001586 This product could have been manufactured on multiple dates. Personal assistance will be needed to date the product more accurately. This product could have been manufactured the 30th week of 1977 or 1987. (WP-USA) CLICK HERE TO GO TO dishwashercrazy's LINK | ||
|
Post# 417124 , Reply# 6 2/20/2010 at 11:28 (5,171 days old) by dadoes (TX, U.S. of A.) |
||
 | ||
| Post# 417132 , Reply# 7 2/20/2010 at 12:02 (5,171 days old) by maytaga407 (Heber Utah) | ||
|
whirlpool
More personal assistance can I give Mike. Its a BD and has a water fall lint filter that donen't work. I think its been disconnected. It is a cool machine. I think its in need of some new bearrings as it is really load when it spins. As for the dryer I no its older just buy looking at it. It has a few problems.
| ||
| Post# 417151 , Reply# 8 2/20/2010 at 12:46 (5,171 days old) by pierreandreply4 (St-Bruno de montarville (province of quebec) canada) | ||
 | ||
| Post# 417152 , Reply# 9 2/20/2010 at 12:47 (5,171 days old) by peterh770 (Marietta, GA) | ||
 | ||
|
Post# 417156 , Reply# 10 2/20/2010 at 12:52 (5,171 days old) by volvoguy87 (Cincinnati, OH) |
||
Dryer. | ||
| Post# 417158 , Reply# 11 2/20/2010 at 12:58 (5,171 days old) by supersurgilator (Indiana) | ||
|
Can you post a pic of the inside of this washer? It is beautiful and I have never seen a 24 | ||
| Post# 417179 , Reply# 12 2/20/2010 at 14:26 (5,171 days old) by pierreandreply4 (St-Bruno de montarville (province of quebec) canada) | ||
|
| ||
| Post# 417220 , Reply# 13 2/20/2010 at 18:38 (5,171 days old) by 70series ( Connecticut.) | ||
|
Definitely a 1977 model. If nothing else, the chrome handle is a dead giveaway, as 1977 was the last year those were available for Whirlpools. Have a good one, James | ||
|
Post# 417322 , Reply# 14 2/21/2010 at 10:49 (5,170 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
24" BD 1977 WP washer
Great little washer. This washer uses the regular 95405 belt that 99% of all WP BDs used, its needs a three port water pump for the lint filter to work, a four port pump will not work unless drill a hole in the side of the outer tub and plumb in a water source for the lower pump. Some thing I wouldn't even try. A WP of this age may be starting to have some serious issues with center post seals and bearings look under the washer and check for any brown or black stains spraying on the inside the cabinet which usually indicates water getting into the main bearings. A stain next to the pump may just be a bad water pump or even an old stain from the original water pump.If it needs main bearings and seals you are in for a very serious repair.
| ||
| Post# 417663 , Reply# 15 2/22/2010 at 18:05 (5,169 days old) by maytaga407 (Heber Utah) | ||
|
Inside shot | ||
|
Post# 417666 , Reply# 16 2/22/2010 at 18:08 (5,169 days old) by appnut (TX) |
||
|
| ||
| Post# 417670 , Reply# 17 2/22/2010 at 18:15 (5,169 days old) by maytaga407 (Heber Utah) | ||
|
And the control panel | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
