|
Thread Number: 30576
Older Kenmore Dishwasher for parts |
[Down to Last] |  |
Post# 462452 9/9/2010 at 17:30 (4,975 days old) by yogitunes  (New Jersey) |
||
 | ||
|
|
Post# 462453 , Reply# 1 9/9/2010 at 17:31 (4,975 days old) by yogitunes (New Jersey) |
||
|
| ||
|
Post# 462454 , Reply# 2 9/9/2010 at 17:32 (4,975 days old) by yogitunes (New Jersey) |
||
|
| ||
|
Post# 462455 , Reply# 3 9/9/2010 at 17:33 (4,975 days old) by yogitunes (New Jersey) |
||
|
| ||
|
Post# 462457 , Reply# 4 9/9/2010 at 17:35 (4,975 days old) by yogitunes (New Jersey) |
||
|
| ||
|
Post# 462460 , Reply# 5 9/9/2010 at 17:47 (4,975 days old) by turquoisedude (.) |
||
OOOH! | ||
|
Post# 462469 , Reply# 6 9/9/2010 at 18:23 (4,975 days old) by yogitunes (New Jersey) |
||
|
| ||
|
Post# 462497 , Reply# 7 9/9/2010 at 22:14 (4,975 days old) by peteski50 (New York) |
||
Sears! | ||
| Post# 462508 , Reply# 8 9/9/2010 at 23:59 (4,975 days old) by alr2903 (TN) | ||
|
D&M All the way, you can just "spot em". Does this share the same pump as the 24" sibling? D&M used lots of water and were very good performers. For many of us they were our first taste of "dishwashing freedom", Mom's and teenagers. alr2903 | ||
| Post# 462538 , Reply# 9 9/10/2010 at 06:43 (4,975 days old) by cycla-fabric (New Jersey (Northern)) | ||
I would take it, if.. | ||
|
Post# 462577 , Reply# 10 9/10/2010 at 11:52 (4,974 days old) by yogitunes (New Jersey) |
||
|
from what I know it works fine, it was taken out to be replaced by a reverse osmosis system, a dishwasher didn't matter to him....it is an undercounter model....no bottom screen came with it, I had a full size portable years ago like this one, and it didn't have a screen either, and you had to watch for pieces of broken glass getting stuck in the impeller...
| ||
| Post# 863633 , Reply# 11 1/23/2016 at 08:49 (3,014 days old) by jmgrova () | ||
|
Dishwasher Well I am looking for a d&m kenmore just like that 18in or a large portable if you want to sell it let me know 5185676305 Joe | ||
|
Post# 863698 , Reply# 12 1/23/2016 at 15:26 (3,013 days old) by goatfarmer (South Bend, home of Champions) |
||
 | ||
| Post# 863876 , Reply# 13 1/24/2016 at 18:08 (3,012 days old) by delaneymeegan (Midwest) | ||
 | ||
| Post# 1151821 , Reply# 14 6/20/2022 at 15:20 (673 days old) by FixEvenThough (North York) | ||
I have one too!
I have essentially this model, the lettering on the front is a little different but the rest looks the same. I'm currently trying to save it, of course it's leaking at the pump. If it doesn't work out, I may have a parts unit for you! Otherwise if anyone has a schematic or good directions how to re&re the pump etc, please pass them along.
| ||
|
Post# 1151831 , Reply# 15 6/20/2022 at 18:34 (673 days old) by Searsbest (Attleboro, Ma) |
||
Old posts... | ||
| Post# 1151847 , Reply# 16 6/20/2022 at 21:09 (673 days old) by rpms (ontario canada) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
