Thread Number: 30764
Maytag Washer and Dryer For Sale |
[Down to Last] |
Post# 464801   9/22/2010 at 11:16 (4,961 days old) by yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
|
|
Post# 464802 , Reply# 1   9/22/2010 at 11:17 (4,961 days old) by yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
|
Post# 464858 , Reply# 2   9/22/2010 at 15:08 (4,961 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
|
Post# 465922 , Reply# 3   9/27/2010 at 09:16 (4,956 days old) by akronman (Akron/Cleveland Ohio)   |   | |
Checkrate/Likes
 
     
|
Post# 465923 , Reply# 4   9/27/2010 at 09:23 (4,956 days old) by GadgetGary (Bristol,CT)   |   | |
Checkrate/Likes
 
     
|
Post# 465924 , Reply# 5   9/27/2010 at 09:25 (4,956 days old) by akronman (Akron/Cleveland Ohio)   |   | |
Checkrate/Likes
 
     
|
Post# 465946 , Reply# 6   9/27/2010 at 11:17 (4,956 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 466226 , Reply# 7   9/28/2010 at 18:17 (4,955 days old) by yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
|
Post# 466231 , Reply# 8   9/28/2010 at 18:56 (4,955 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
I personally wouldn't pay over a $100 for the set. It really depends what models they're and their condition (not just their outward appearance). They look like one of the very last production 06 models. The washer could be a 606/608. Can't tell what the dryer is though, besides being an HOH.
One thing I would strongly advise to anyone purchasing a pre 89 helical Maytag washer is to remove the trans belt and rotate the main pulley counter-clockwise (agitation). If it rotates smooth and freely (should require practically no effort), the trans is probably good. If the pulley is stiff or requires muscle to rotate, the upper trans bushings are shot and a donor trans will be needed. Sadly, Maytag never made the upper bushings available to the public but I'm currently working on that problem and may be able to have a small production run of these upper bushings in the future :) |