Thread Number: 33740
gold colored fabric softener disp. for KM belt drive |
[Down to Last] |
Post# 507044   3/26/2011 at 17:11 (4,772 days old) by cphifer5115 (Jackson, TN)   |   | |
Checkrate/Likes
 
     
|
|
Post# 507060 , Reply# 1   3/26/2011 at 18:12 (4,772 days old) by pierreandreply4 (St-Bruno de montarville (province of quebec) canada)   |   | |
Checkrate/Likes
 
     
|
Post# 507098 , Reply# 2   3/26/2011 at 21:24 (4,772 days old) by cphifer5115 (Jackson, TN)   |   | |
Checkrate/Likes
 
     
|
Post# 507194 , Reply# 3   3/27/2011 at 07:22 (4,771 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 507205 , Reply# 4   3/27/2011 at 08:29 (4,771 days old) by KenmoreGuy64 (Charlotte, NC)   |   | |
Checkrate/Likes
 
     
Chris -
I hope Kenny's parts reveal something for you. The gold removable dispenser was not available very long, relatively speaking, and not used on many models. To my knowledge, the gold dispensers were available in a couple 1972 and 1973 60-series standard cap machines, I believe one or two 1973 large cap machines, the 1974 60-series, the 1975 500, and the 1975 60 series standard machine, and that's about it. Prior to 1972 back to about 1968 these dispensers were bolt-on and not every-day removable as they doubled as agitator caps. The revised removable dispenser was changed to white for 1976. Most of the models above were good sellers, but that's not a huge time window when we are now 35 to 40 years later. The gold straight vane agitator remained in that color until 1983, but I don't think any machines were marketed during that time with the SV and a dispenser. If Kenny doesn't have anything, you might want to check with used appliance dealers who were around in the 90s or earlier, as many keep stock piles of parts like this and may not have disposed of the parts yet. Again, good luck! Gordon |
Post# 507251 , Reply# 5   3/27/2011 at 12:22 (4,771 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 507262 , Reply# 6   3/27/2011 at 12:48 (4,771 days old) by pierreandreply4 (St-Bruno de montarville (province of quebec) canada)   |   | |
Checkrate/Likes
 
     
there is always the option that you can buy a white fabric sofner dispenser and if you have some gold acrylic paint for plastic you can always paint the fabric softner dispenser gold because i think that during the 80 some inglis whirlpool washers use that particular dispenser model when they swtich to this agitator desing and you could always ask in appliance stores that sell parts to see if they have 1 avalable
|
Post# 507278 , Reply# 7   3/27/2011 at 14:07 (4,771 days old) by cphifer5115 (Jackson, TN)   |   | |
Checkrate/Likes
 
     
|