Thread Number: 39587
frigidaire spin tube help |
[Down to Last] |
Post# 586438   4/1/2012 at 16:53 (4,404 days old) by marty (Central Point, Oregon)   |   | |
Checkrate/Likes
 
     
Anyone out there have a service manual for a 1962 frigidaire dishmobile? I need a wiring schematic as well as help on removing the heating element to stop a leak...
Thanks in advance for the help!
This site ROCKS! |
|
Post# 586450 , Reply# 1   4/1/2012 at 17:43 (4,404 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
dishwasher that i picked up in chicago last year. don't know if the wiring diag for it would help you or not. also not sure what year mine is, i'm thinking it was around 62 also if i remember correctly.
here's a pic of it and also of the heating element on mine. those calrod units just unbolt from underneath, the ends are threaded and a nut holds them tight against the tub. i can check for a wiring diag. if you like. |
Post# 586452 , Reply# 2   4/1/2012 at 17:45 (4,404 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 586460 , Reply# 3   4/1/2012 at 18:00 (4,404 days old) by marty (Central Point, Oregon)   |   | |
Checkrate/Likes
 
     
Thanks Rollermatic! Please scan the diagram you have, that would be awesome! |
Post# 588501 , Reply# 4   4/10/2012 at 22:16 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
had a chance to dig out the spin tube dishwasher today (had it in storage in the barn) and i found the wiring diag on the bottom panel. going to photo it now and post it here for you! in case you don't see this i will e mail you directly as well (if you have an e mail posted on this site, will look here shortly).
|
Post# 588504 , Reply# 5   4/10/2012 at 22:27 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588505 , Reply# 6   4/10/2012 at 22:29 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588506 , Reply# 7   4/10/2012 at 22:31 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588507 , Reply# 8   4/10/2012 at 22:32 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588509 , Reply# 9   4/10/2012 at 22:34 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588510 , Reply# 10   4/10/2012 at 22:34 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588512 , Reply# 11   4/10/2012 at 22:35 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588514 , Reply# 12   4/10/2012 at 22:39 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588516 , Reply# 13   4/10/2012 at 22:43 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588517 , Reply# 14   4/10/2012 at 22:45 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588518 , Reply# 15   4/10/2012 at 22:48 (4,395 days old) by ROLLERMATIC (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 588538 , Reply# 16   4/11/2012 at 01:14 (4,395 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 588545 , Reply# 17   4/11/2012 at 03:32 (4,395 days old) by PhilR (Quebec Canada)   |   | |
Checkrate/Likes
 
     
|
Post# 588602 , Reply# 18   4/11/2012 at 11:06 (4,394 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
on the cast iron pump housing of mine is stamped a date of nov. 1st 1963! what a month that was for america!
mine also has the small top rinse spray arm and no bakelite rack tracks so i guess mine was purchased in late 63 or in 1964. i drove to chicago and picked it up in march of 2011. i tore it down completely and restored it (all in a previous thread) and it ran perfectly. then i just added it to the collection and hadn't given it much thought till this thread came along. i think i'll install it in the kitchen for awhile and use it on occasion. i have emailed the owner of this thread (marty) to let him know i found wiring diags. |