| Thread Number: 39688
Ebay UK April 2012 |
[Down to Last] |  |
| Post# 587853 4/8/2012 at 04:29 (409 days old) by henrypeter21 (United Kingdom) | ||
  Here is the up to date ebay thread. I will start off with a hotpoint 9314 Dryer.
CLICK HERE TO GO TO henrypeter21's LINK 
| ||
|
|
| Post# 587854 , Reply# 1 4/8/2012 at 04:31 (409 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 587855 , Reply# 2 4/8/2012 at 04:33 (409 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 587857 , Reply# 3 4/8/2012 at 04:36 (409 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 587858 , Reply# 4 4/8/2012 at 04:41 (409 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 587859 , Reply# 5 4/8/2012 at 04:44 (409 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 587881 , Reply# 6 4/8/2012 at 08:37 (409 days old) by optima (Cumbria England) | ||
 | ||
| Post# 587906 , Reply# 7 4/8/2012 at 11:36 (409 days old) by HotpointFan (Leeds, England) | ||
 | ||
| Post# 588013 , Reply# 8 4/9/2012 at 01:58 (408 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 588017 , Reply# 9 4/9/2012 at 03:54 (408 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 588018 , Reply# 10 4/9/2012 at 03:55 (408 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 588019 , Reply# 11 4/9/2012 at 03:59 (408 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 588037 , Reply# 12 4/9/2012 at 05:36 (408 days old) by henrypeter21 (United Kingdom) | ||
|
I need some sort of project for the summer holidays, and as my zanussi is in the house i cant play with it anymore, so i am thinking of getting an indesit to fix and sell. Its near me too.
CLICK HERE TO GO TO henrypeter21's LINK 
| ||
| Post# 588038 , Reply# 13 4/9/2012 at 05:39 (408 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 588050 , Reply# 14 4/9/2012 at 07:20 (408 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 588119 , Reply# 15 4/9/2012 at 14:33 (408 days old) by henrypeter21 (United Kingdom) | ||
|
I understand your point Jacob, But as its just going to be my little toy in the garage to play with when I get bored, I think it will last. I will fix it and either intergrate it into the house or sell it and get a few quid for it. Its definatly worth it, and provided I have the time and money, I will make that indesit last good if I get it. What I know for certain is that new bearings for these machines last longer than the ones prebuilt when the machine was purchased. So therefore I should get more life out of it with the new bearings. The WM64 you filmed at the tip - If it was me there, I would have taken it straight away. I have been looking out for one for nearly 8 years. So I feel if I put the indesit on ebay saying "Delivery Around Lowestoft\Yarmouth", I can then say in the description that I will take the old machine away. That way I might find what I have been looking for - You never know, I might find a 95 Series Machine...
| ||
| Post# 588128 , Reply# 16 4/9/2012 at 15:15 (408 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
Its a slim depth model, hence the S instead of an A-yes it is WMS38 Jacob! The drum is narrow too I am told. | ||
| Post# 588405 , Reply# 17 4/10/2012 at 11:52 (407 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 588412 , Reply# 18 4/10/2012 at 12:35 (407 days old) by dyson2drums (United Kingdom) | ||
 The Hotpoint WMS38 was still a standard 5.5kg washing machine as with the WMA30's. We had a WMA58 6kg with the powerstream wash system which is still in daily use at aunts, no problems whatsoever apart from a wire coming loose which was fixed by myself. They were one of the last WMA series machines.
I know quite a lot of people with WMA series washing machines, people with the earlier models had bearing failure which was a common fault. My aunt had a WMA76 for around 7/8 years until the end of 2010, that machine did 3 to 5 washes everyday and never had a single problem until the bearings went so it was replaced with an LG Steam F1479FDS6. | ||
| Post# 589251 , Reply# 19 4/14/2012 at 09:19 (403 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 589299 , Reply# 20 4/14/2012 at 12:46 (403 days old) by aquarius8000 (Hampshire - UK) | ||
 | ||
| Post# 589300 , Reply# 21 4/14/2012 at 12:49 (403 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 589301 , Reply# 22 4/14/2012 at 12:51 (403 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 589356 , Reply# 23 4/14/2012 at 15:38 (403 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 589382 , Reply# 24 4/14/2012 at 16:35 (402 days old) by aegokocarat (Cearphily county South Wales) | ||
 Faure (French version of Zanussi) H-axis top loading washing machine, hope the person who buys this can understand French :P
CLICK HERE TO GO TO aegokocarat's LINK 
| ||
| Post# 589529 , Reply# 25 4/15/2012 at 03:47 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
Good condition CLICK HERE TO GO TO glenfieldmathk1's LINK | ||
| Post# 589530 , Reply# 26 4/15/2012 at 03:49 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
Such a strange Bosch model, combination of old & New CLICK HERE TO GO TO glenfieldmathk1's LINK | ||
| Post# 589531 , Reply# 27 4/15/2012 at 03:57 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
Cheap, but not working (bearings) CLICK HERE TO GO TO glenfieldmathk1's LINK | ||
| Post# 589532 , Reply# 28 4/15/2012 at 03:59 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
With Bosch Door???? CLICK HERE TO GO TO glenfieldmathk1's LINK | ||
| Post# 589534 , Reply# 29 4/15/2012 at 04:04 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
WM31P CLICK HERE TO GO TO glenfieldmathk1's LINK | ||
| Post# 589535 , Reply# 30 4/15/2012 at 04:08 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
9577 Apparently only works well on some cycles? CLICK HERE TO GO TO glenfieldmathk1's LINK | ||
| Post# 589538 , Reply# 31 4/15/2012 at 04:19 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
WMTL79 CLICK HERE TO GO TO glenfieldmathk1's LINK | ||
| Post# 589539 , Reply# 32 4/15/2012 at 04:24 (402 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 589541 , Reply# 33 4/15/2012 at 04:28 (402 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
Just presumed, as they are old Ariston Dials, and Indesit did make some models with old Hotpoint logo, that's all! | ||
| Post# 589542 , Reply# 34 4/15/2012 at 04:30 (402 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 589543 , Reply# 35 4/15/2012 at 04:32 (402 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 589544 , Reply# 36 4/15/2012 at 04:35 (402 days old) by HotpointFan (Leeds, England) | ||
|
| ||
| Post# 589555 , Reply# 37 4/15/2012 at 06:26 (402 days old) by aegokocarat (Cearphily county South Wales) | ||
|
hover softwave washer dryer , could do with a matching cream dial
CLICK HERE TO GO TO aegokocarat's LINK | ||
| Post# 589556 , Reply# 38 4/15/2012 at 06:27 (402 days old) by aegokocarat (Cearphily county South Wales) | ||
|
| ||
| Post# 589557 , Reply# 39 4/15/2012 at 06:28 (402 days old) by aegokocarat (Cearphily county South Wales) | ||
|
| ||
| Post# 589558 , Reply# 40 4/15/2012 at 06:29 (402 days old) by aegokocarat (Cearphily county South Wales) | ||
|
| ||
| Post# 589559 , Reply# 41 4/15/2012 at 06:32 (402 days old) by aegokocarat (Cearphily county South Wales) | ||
|
| ||
| Post# 589576 , Reply# 42 4/15/2012 at 08:09 (402 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
| Post# 589609 , Reply# 43 4/15/2012 at 11:10 (402 days old) by aegokocarat (Cearphily county South Wales) | ||
|
| ||
| Post# 589616 , Reply# 44 4/15/2012 at 11:38 (402 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 589617 , Reply# 45 4/15/2012 at 11:41 (402 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 589618 , Reply# 46 4/15/2012 at 11:43 (402 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 589619 , Reply# 47 4/15/2012 at 11:44 (402 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 589621 , Reply# 48 4/15/2012 at 11:46 (402 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 589622 , Reply# 49 4/15/2012 at 11:49 (402 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 590261 , Reply# 50 4/17/2012 at 12:01 (400 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 590267 , Reply# 51 4/17/2012 at 12:42 (400 days old) by aegokocarat (Cearphily county South Wales) | ||
|
| ||
Post# 590268 , Reply# 52 4/17/2012 at 12:50 (400 days old) by vacbear58  (London UK) |
||
 | ||
| Post# 591581 , Reply# 53 4/23/2012 at 11:03 (394 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 591583 , Reply# 54 4/23/2012 at 11:07 (394 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 591810 , Reply# 55 4/24/2012 at 13:00 (393 days old) by optima (Cumbria England) | ||
|
What a odd set up for an Aquarius. Firstly the pull on/push off programmer & the strange 30deg silk wash, which on the programme guide seems to be in the wrong place. It should be under the Acrylics & wool mixtures programme & not under the Machine washable wool programme. I would love to see what speed module is on this model.
Thanks Chris for putting this on here. | ||
| Post# 591840 , Reply# 57 4/24/2012 at 15:42 (393 days old) by optima (Cumbria England) | ||
|
Well i think it will have the 95 series timer & module on it because you have to pull the knob out to start it. I have also figured out why the delicate silk programe is not positioned where the machine washable wool is. It is because on this machine you have not got a slow spin option button so the 1000rpm long wool spin would to fast for silk even though where the silk programme is positioned you still get a final 1000 spin burst which to me is wrong. Hotpoint have made a mistake by adding the silk programme without a thinkink about adding a slow spin button.
| ||
| Post# 591964 , Reply# 58 4/25/2012 at 04:54 (392 days old) by electron1100 (England) | ||
 | ||
|
Post# 592115 , Reply# 59 4/25/2012 at 17:03 (391 days old) by SuperElectronic (London, UK) |
||
|
Somehow it seems a novelty to find a 20-something year old Candy! Well...over here, anyway... Anyone near Leeds fancy it? Seems in good shape too. CLICK HERE TO GO TO SuperElectronic's LINK 
| ||
| Post# 592792 , Reply# 60 4/29/2012 at 02:23 (388 days old) by aquarius8000 (Hampshire - UK) | ||
|
A Ice Blue Hotpoint Casatta has surfaced. 1 was on my local Gumtree but then it sold for £50. this one is for parts/spares and repairs.
CLICK HERE TO GO TO aquarius8000's LINK 
| ||
| Post# 592793 , Reply# 61 4/29/2012 at 03:14 (388 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 592794 , Reply# 62 4/29/2012 at 03:15 (388 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 592795 , Reply# 63 4/29/2012 at 03:17 (388 days old) by aquarius8000 (Hampshire - UK) | ||
|
| ||
| Post# 592810 , Reply# 64 4/29/2012 at 06:48 (388 days old) by aegokocarat (Cearphily county South Wales) | ||
|
| ||
| Post# 592862 , Reply# 65 4/29/2012 at 14:18 (388 days old) by henrypeter21 (United Kingdom) | ||
|
| ||
|
Post# 593554 , Reply# 66 5/2/2012 at 05:16 (385 days old) by SeamusUK (Dover Kent UK) |
||
 | ||
| Post# 593900 , Reply# 67 5/3/2012 at 11:55 (384 days old) by aquarius8000 (Hampshire - UK) | ||
|
The green WM64 was in a Pistachio green. Here is a link to the casatta thread. The colours were Pistachio green, Soft Lilac and Ice blue.
CLICK HERE TO GO TO aquarius8000's LINK 
| ||
| Post# 596132 , Reply# 68 5/13/2012 at 11:49 (374 days old) by CandyD10_14X (Ingatestone, East Anglia, UK) | ||
 | ||
| Post# 596136 , Reply# 69 5/13/2012 at 12:22 (374 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
I think there was a rose pink one yes! could be soft Lilac though:) | ||
| Post# 596137 , Reply# 70 5/13/2012 at 12:26 (374 days old) by aquarius1984 (Crewe Cheshire UK ) | ||
 | ||
|
|
Comes to the Rescue!
|
