| Thread Number: 40664
Penny for your thoughts |
[Down to Last] |
Post# 601485   6/6/2012 at 12:51 (378 days old) by countryguy (Astorville, ON, Canada)     |
  | |
![]() | ||
|
|
Post# 601494 , Reply# 1   6/6/2012 at 13:26 (378 days old) by whirlcool (Just North Of Houston, Texas)     |
  | |
|
That does look good, I really like it!
It doesn't appear that the people laying the floor down are using any kind of mortar mix. I imagine that would take some time to lay down. Also did they cover it with some kind of finish to prevent oxidation of the pennies? I could just a person walking across the floor and coming off the floor with green feet. | ||
Post# 601507 , Reply# 2   6/6/2012 at 14:32 (378 days old) by Maytagbear (N.E. Ohio)     |
  | |
|
About- the only use for them these days, alas! Lawrence/Maytagbear | ||
Post# 601510 , Reply# 3   6/6/2012 at 14:39 (378 days old) by countryguy (Astorville, ON, Canada)     |
  | |
![]() | ||
Post# 601516 , Reply# 4   6/6/2012 at 14:59 (378 days old) by Ultramatic (New York City)     |
  | |
But aren't pennies made mostly of a copper alloy?![]() | ||
Post# 601518 , Reply# 5   6/6/2012 at 15:01 (378 days old) by foraloysius (Groningen, the Netherlands)     |
  | |
![]() | ||
Post# 601520 , Reply# 6   6/6/2012 at 15:05 (378 days old) by Hunter (Colorado)     |
  | |
|
@Ultramatic Pennies are sort-of a copper alloy. Until 1982, they were a 95% copper, 5% zinc alloy. Since then, they have been a 99.2 % , .8% copper alloy with pure copper on the outside. I'd say they were not durable at all, without A LOT of urethane on them. A LOT of urethane. | ||
Post# 601659 , Reply# 7   6/7/2012 at 01:39 (377 days old) by tolivac (greenville nc)     |
  | |
|
Great suggestion for that big jar 'o pennies in the closet-and that one in the desk drawer! | ||
Post# 601767 , Reply# 8   6/7/2012 at 14:09 (377 days old) by Frigilux (the open prairie of Minnesota)     |
  | |
|
| ||
Post# 601776 , Reply# 9   6/7/2012 at 14:46 (377 days old) by whirlcool (Just North Of Houston, Texas)     |
  | |
|
If you look closely at the pennies on the installed floor it looks like they poured some kind of clear epoxy over the pennies. The gloss looks quite deep.
Also notice how the pennies have been lined up, each row is a straight line. The link leads to instructions about how to do this... CLICK HERE TO GO TO whirlcool's LINK | ||
|
|
Comes to the Rescue!