| Thread Number: 40815
1954 Frigidaire Imperial Cycla-Matic parts - free to good home! |
[Down to Last] |  |
Post# 603939 6/15/2012 at 19:34 (343 days old) by 58limited  (Port Arthur, Texas) |
||
  Thanks to Travis and Lou, I was going to complete my 1954 Imperial Cycla-Matic single door model. One problem: the parts arrived and apparently Frigidaire made these in two sizes. I thought that the Imperial Cycla-Matics, being TOL, were all the same size. WRONG!! My loss is your gain. If you have one of these, I have the parts:
Veggie drawers with plastic shelves that they slide on
Door shelves
Egg holder/dispensing shelves - behind the serving tray
The rare serving tray
The chrome bottom toe panel/kick panel/ whatever it is called. A small dented area and a little rust
The chrome side trim on the bottom, a few minor dens and a little rust
Freezer door (inside freezer door - this is a single door model)
Fridge shelves
A few more misc. parts
Travis and Lou gave these to me and I will give them to you, just pay shipping. E-mail me for pictures: limited58 @ gt.rr.com
| ||
|
|
|
Post# 604031 , Reply# 1 6/16/2012 at 08:38 (343 days old) by 58limited (Port Arthur, Texas) |
||
|
The shelves are about 26" X 16" with one smaller shelf that is 26" X 13 1/2" - it is the top shelf I think
The freezer door is 27 1/4" X 13"
The serving tray is 24" X 13 5/8"
The chrome toe panel is 31 3/8" long, I measured the vertical back mounting surface, the base is a little longer.
One veggie drawer is about 12" X 15" not counting the handle.
I have two inquiries, one person wants shelves, the other wants "everything" and as soon as I measure the parts, they can decide if they will work for their fridges. To be fair, I will offer the parts in the order that I receive the requests. | ||
|
Post# 604851 , Reply# 2 6/19/2012 at 18:48 (340 days old) by 58limited (Port Arthur, Texas) |
||
|
These parts came from a larger Imperial Cycla-Matic than mine. The two people who sent inquiries also have the smaller model so they can't use the parts. If anyone has one of these, measure yours and see if the parts will fit it. Let me know, as I said, they are free, just pay shipping. If there are no takers. I will list them on ebay with a $1.00 starting bid for each piece.
I didn't list every single part in the post above, if you need a part not listed ask me and I'll see if i have it.
| ||
|
|
Comes to the Rescue!
|
