Eurotech (Antonio Merloni) FL in Detroit

	User Name: Password:
Forum Topics & Rules Manuals & Literature	New users Click-here to sign-up

Thread Number: 41167
Eurotech (Antonio Merloni) FL in Detroit

[Down to Last]

Post# 608712 7/6/2012 at 16:49 (320 days old) by jamiel (Detroit, Michigan)
Just drove by a used appliance store here, there was a Eurotech from Antonio Merloni available. Am debating about buying it (would be my 1st experience with a FL). It seems quite basic (timer knob, continuous cold to hot temp dial, and five buttons...no indication of spin speed or age. Hot/cold fill, normal 3 wire plug. Boot seemed pliable and not mildewy, although the machine did have a bit of a funk I blame it on the hot (102) temperatures. I didn't ask price, but might get it for <$100 or less. Any comments?

Post# 608714 , Reply# 1 7/6/2012 at 17:03 (320 days old) by andyvivo (Essex)
Check the filter flap for the rating label, the serial numbers first digits are for example 9910*** week 10, 1999 200215* week 15, 2002

Post# 608719 , Reply# 2 7/6/2012 at 18:03 (320 days old) by ronhic (Canberra, Australia)
If it doesn't have any warranty on it, ask them if they'll give you a couple of weeks 'return and refund' so that you can be sure that it works ok...though for $100, you would barely get a non-working machine here off ebay and certainly not one from a retailer.

Post# 609003 , Reply# 3 7/8/2012 at 08:25 (319 days old) by hotpointfan (Leeds, England)
*General description* Dont be tempted to overspend on it, they are not built to the best quality in the world. Try not to spend too much more that $100 on it. Best wishes hotpointfan

Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...
Discuss-O-MAT Log-In