|
Thread Number: 43626
Just aquired this. |
[Down to Last] |  |
|
| Post# 641054 , Reply# 1 11/23/2012 at 13:59 (4,163 days old) by marthalover4eve () | ||
|
yes i would of payed 70 -100 for that | ||
| Post# 641077 , Reply# 2 11/23/2012 at 16:26 (4,163 days old) by SeamusUK (Dover Kent UK) | ||
It will need to be modified :) | ||
| Post# 641079 , Reply# 3 11/23/2012 at 17:08 (4,163 days old) by ronhic (Canberra, Australia) | ||
 | ||
| Post# 641835 , Reply# 4 11/26/2012 at 17:12 (4,160 days old) by SeamusUk (Dover Kent UK) | ||
|
Newer than we thought....
Hey Guys
Upon internal inspection it was actually made in December 2004 making it one of the last of this model. Have decided to at least initially convert it to 13A- literally a case of removing the live lead from the 2nd heater and insulating it. The cable will fit the terminals of a MK Safetyplug but the outer sheath is too big for the clamp so its just on the inner cores but its not going to be under strain so its not a problem...Oh it spins fine but needs a water test. Seamus | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
