Thread Number: 44713
Agitator question. |
[Down to Last] |
Post# 656211   1/27/2013 at 08:45 (4,100 days old) by rpms (ontario canada)   |   | |
Checkrate/Likes
 
     
|
|
Post# 656212 , Reply# 1   1/27/2013 at 08:46 (4,100 days old) by rpms (ontario canada)   |   | |
Checkrate/Likes
 
     
|
Post# 656222 , Reply# 3   1/27/2013 at 10:16 (4,100 days old) by rpms (ontario canada)   |   | |
Checkrate/Likes
 
     
|
Post# 656223 , Reply# 4   1/27/2013 at 10:21 (4,100 days old) by Frigilux (The Minnesota Prairie)   |   | |
Checkrate/Likes
 
     
I'm trying to conjure an accurate memory of the "preggers" Roto-Swirl on our 1960 Kenmore. You are right about the bottom ends of the vanes; it looks distinctly like a RS there. However, this agitator differs from an RS in that the vanes didn't start right at the top, as they do on the Mitrade.
Interesting! Have not seen an agitator quite like this one, before. |
Post# 656233 , Reply# 5   1/27/2013 at 10:47 (4,100 days old) by Unimatic1140 (Minneapolis)   |   | |
Checkrate/Likes
 
     
|
Post# 656246 , Reply# 6   1/27/2013 at 12:35 (4,099 days old) by Frigilux (The Minnesota Prairie)   |   | |
Checkrate/Likes
 
     
|