Thread Number: 44929
Maytag Atlantis Transmission Replacement |
[Down to Last] |
|
Post# 658951 , Reply# 1   2/8/2013 at 13:03 (4,087 days old) by classiccat ()   |   | |
Checkrate/Likes
 
     
what prompted the overhaul... |
Post# 658954 , Reply# 2   2/8/2013 at 13:04 (4,087 days old) by classiccat ()   |   | |
Checkrate/Likes
 
     
brake replacement "tool" (6) 2" 10-24 screws. (I would've preferred hex-heads): |
Post# 658955 , Reply# 3   2/8/2013 at 13:07 (4,087 days old) by classiccat ()   |   | |
Checkrate/Likes
 
     
home-made spring tool made with aluminum scraps that I had laying around. I underestimated the utility of this thing! |
Post# 658959 , Reply# 4   2/8/2013 at 13:19 (4,087 days old) by classiccat ()   |   | |
Checkrate/Likes
 
     
~ 10 loads in the books with zero issues! |
Post# 659110 , Reply# 5   2/9/2013 at 06:23 (4,086 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)   |   | |
Checkrate/Likes
 
     
|
Post# 659146 , Reply# 6   2/9/2013 at 09:56 (4,086 days old) by classiccat ()   |   | |
Checkrate/Likes
 
     
Thanks! This is a MAV6257AWW. |
Post# 659147 , Reply# 7   2/9/2013 at 10:09 (4,086 days old) by classiccat ()   |   | |
Checkrate/Likes
 
1    
if anyone about to embark on a similar journey, here are some additional pictures: CLICK HERE TO GO TO classiccat's LINK |
Post# 659213 , Reply# 8   2/9/2013 at 15:44 (4,086 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)   |   | |
Checkrate/Likes
 
     
|
Post# 659245 , Reply# 9   2/9/2013 at 17:32 (4,086 days old) by classiccat ()   |   | |
Checkrate/Likes
 
     
It has a bit of everything :) |
Post# 659246 , Reply# 10   2/9/2013 at 17:33 (4,086 days old) by classiccat ()   |   | |
Checkrate/Likes
 
     
and the electric dryer to match... |
Post# 659289 , Reply# 11   2/9/2013 at 22:23 (4,086 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 659295 , Reply# 12   2/9/2013 at 22:55 (4,086 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)   |   | |
Checkrate/Likes
 
     
|
Post# 659308 , Reply# 13   2/10/2013 at 01:18 (4,086 days old) by scrubflex (bronx, new york)   |   | |
Checkrate/Likes
 
     
Thanks alot for the step-by-step and the great pics... I'm really excited to hear that Atlantis can last so long. I like to swap my Whirlpool Gold DD for an Atlantis MAV9750. |
Post# 659673 , Reply# 15   2/11/2013 at 16:32 (4,084 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 659711 , Reply# 16   2/11/2013 at 18:56 (4,084 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
Good job on saving your washer, this machine was the Norge washer design after MT got hold of it. The transmission was designed to be a throw away unit, that is why the cover is crimped in place and no parts are available to repair it, although I am sure with a little determination it could be fixed. |
Post# 1084998 , Reply# 19   8/13/2020 at 21:02 (1,344 days old) by Repairguy (Danbury, Texas)   |   | |
Checkrate/Likes
 
1    
|
Post# 1085051 , Reply# 20   8/14/2020 at 11:32 (1,343 days old) by oldschool88 (NJ)   |   | |
Checkrate/Likes
 
     
And here's a pic of the 15 year old snubber ring that came out of it. I'm wishing I kept the old transmission for disassembly...the failure-prone center drive gear is available on eBay for $12.
View Full Size
|