Thread Number: 45560
Basic, No Frills Electric Dryer |
[Down to Last] |
|
Post# 667011 , Reply# 1   3/19/2013 at 10:11 (4,027 days old) by coldspot66 (Plymouth, Mass)   |   | |
Checkrate/Likes
 
     
Lowes has the Roper brand, made by Whirlpool, with the lint screen on the top right (not inside the drum). Home Depot has the Admiral brand, same machine. Both are inexpensive and the best machine out there. I think they only carry one model, but should do nicely. |
Post# 667012 , Reply# 2   3/19/2013 at 10:13 (4,027 days old) by coldspot66 (Plymouth, Mass)   |   | |
Checkrate/Likes
 
     
Oops, didn't see that you had space constraints. These dryers are 29" wide, but the depth is less, so maybe you can get them in the doorway sideways? |
Post# 667015 , Reply# 3   3/19/2013 at 10:29 (4,027 days old) by Pulsator (Saint Joseph, MI)   |   | |
Checkrate/Likes
 
     
For a no frills dryer, I'd go for a Speed Queen! It's only 26 7/8 inches wide and you can get just a few options or most of the comforts of a regular dryer. This machine does not use moisture sensing but rather thermostatic sensing which is what all lower end dryers use anyway. All of the models in this link starting with ADE are electric. CLICK HERE TO GO TO Pulsator's LINK |
Post# 667046 , Reply# 4   3/19/2013 at 12:29 (4,027 days old) by westie2 ()   |   | |
Checkrate/Likes
 
     
All 27" in width good dryers. CLICK HERE TO GO TO westie2's LINK |
Post# 667055 , Reply# 5   3/19/2013 at 13:47 (4,027 days old) by tecnopolis (Ocala/Dunnellon, Florida 34481)   |   | |
Checkrate/Likes
 
     
|
Post# 667110 , Reply# 6   3/19/2013 at 19:42 (4,027 days old) by joefuss1984 (Little Rock, AR)   |   | |
Checkrate/Likes
 
     
|
Post# 667123 , Reply# 7   3/19/2013 at 20:15 (4,027 days old) by SawaSun ()   |   | |
Checkrate/Likes
 
     
Were the sellers accommodating when/if you asked them to test out the machines before you purchased them? |
Post# 667242 , Reply# 8   3/20/2013 at 11:58 (4,026 days old) by tecnopolis (Ocala/Dunnellon, Florida 34481)   |   | |
Checkrate/Likes
 
     
I purchased a Neptune Dryer from craigslist and not only did the seller run it for me before I handed him the cash, but he even offered to install either a 3-prong or 4-prong cord depending on what I needed. Even threw in a dryer vent to get me started. Keep in mind, people remodel all the time and are only looking to replace their appliances to either take advantage of those 0% finance offers weather they needed them or not. Not to mention people sometimes are under the impression that an energy star appliance is going to save them a ton of money, not realizing that they have to keep the appliances for many, many years to recoup the additional upfront costs associated with the purchase. Add in the requisite sales tax on such a purchase, as well as the likely hood of an extended warranty, and you begin to see it is an uphill battle.
Finally, I found a Whirlpool Duet washer for sale on craigslist just because a new wife wanted it out of the house because it was purchased by the previous wife and she thought it would remind her new husband of her too much! |
Post# 667327 , Reply# 9   3/20/2013 at 19:26 (4,026 days old) by Volvoguy87 (Cincinnati, OH)   |   | |
Checkrate/Likes
 
     
The dryers with the lint filter access on top by the control panel are all made by Whirlpool and are all 29" wide. These are the best dryers on the market that are easily obtainable. Buy a new one or an old one. They are top-notch performers, about as efficient as a dryer can be, and dead-reliable.
GE and Hotpoint dryers tend to eat front bearings and glide pads, while Frigidaire dryers tend to be smaller, hotter, and can wear through front glides and rear bearings. The heating elements on both are a bit of a pill to change. LG and Samsung make the worst appliances money can buy. I realize this may come off as preachy, but I work selling appliance parts all day to do-it-yourself folks and service professionals. I sell LOTS of dryer parts. Whatever kind you get, keep the exhaust vent clean! Dave |
Post# 667514 , Reply# 10   3/21/2013 at 17:49 (4,025 days old) by jaxsunst ()   |   | |
Checkrate/Likes
 
     
I love my Samsumgs. Almost 3 years and not a problem. I hope they last. |
Post# 669555 , Reply# 13   4/1/2013 at 06:57 (4,014 days old) by mark_wpduet (Lexington KY)   |   | |
Checkrate/Likes
 
     
the lint screen in the TOP vs the door. Those are the types of dryers we had growing up. The WP duet dryers' lint screen are in the door, not the top - so this is my first one in the door.
Can someone explain why a basic WP made dryer would be better than a basic GE dryer? I don't ever remember having a mechanical issue with a dryer in my life (KNOCK ON WOOD) |
Post# 669591 , Reply# 14   4/1/2013 at 09:33 (4,014 days old) by akronman (Akron/Cleveland Ohio)   |   | |
Checkrate/Likes
 
     
GE has a spindle sticking out the back of the drum for its main support, it gets worn and squeaks. At the front, GE uses 2 nylon glides, they wear out. Parts are inexpensive and easily replaced after 15 years. Whirlpool made machines, since the mid 60's, support the drum on the huge interior rear and front bulkheads, no wear, less squeaks, never need replaced. GE lint filter catches the dryer sheet, and fills up partway thru the load. WP top-mount filters have tons more space, get through the entire load. Most electric GE's have the element strung all around the rear bulkhead, WP has a simple heater box, easier to replace. GE drums are smaller, WP 29" cabinets have huge drums, more clothes per load, less wrinkles. Having said all that, GE nevertheless makes a reliable dryer, but WP's design at 29" wide, with the top mount filter, has been proven to just run forever, easy cheap repairs, huge loads of clothes. Either brand is available from no-frills up to lots of treats.
But as others have said, see what your local Craigslist has, used and under $100 always helps me make up my mind long before I'd walk into a big box store and spend $500. |
Post# 669596 , Reply# 15   4/1/2013 at 09:52 (4,014 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
2    
WP built 29" dryers or SQ dryers.
Dryers to avoid and not basic anyway. Samsung, cheapest, thinnest dryer out there, loose change from pockets will actually leave dents in the dryer drum, LOL. I have actually seen SS dryers where the thin SS drums split where the drum is supported by the rear support rollers on several occasions. LG and GE Harmony For many of the above reasons, all Korean appliances are very thin and cheap, it must have something to do with the cost of shipping large appliances here.
All GE dryers, they are not what they used to be, they work well [ if your vent is short ] but have very poor long term durability I would estimate about 1/2 the life span of a WP or SQ dryer overall.
I would also avoid the cheaper dryers from Frigidaire for the same reasons as GEs dryers, poor with long vents and poor durability if used much. |
Post# 669827 , Reply# 17   4/2/2013 at 07:37 (4,013 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
1    
Are by far the cleanest design, best way to clean them is when you start the dryer with a load of clothing, 1 remove the filter with the dryer running 2 holding the filter near the opening remove lint with fingers 3 while holding filter in one hand take wad of lint and wipe any lint that fell on dryer top and sweep it down the lint filter opening 4 disguard wad of lint in trash.
These WP built dryers with the top mounted lint filter is the only design that I have seen where you can easily clean the filter with the dryer acting as a vacuum system that eliminates almost all of the mess and airborne dust that you cannot easily avoid with any other filter design unless you keep a vacuum cleaner with a hose set up next to the dryer [ I have customers that actually do this for dryers without TMLF ] |
Post# 669881 , Reply# 18   4/2/2013 at 10:47 (4,013 days old) by westie2 ()   |   | |
Checkrate/Likes
 
     
The Hotpoint dryer sounds good and fits your measurments you need. |
Post# 670206 , Reply# 19   4/3/2013 at 12:06 (4,012 days old) by kb0nes (Burnsville, MN)   |   | |
Checkrate/Likes
 
     
I have used dryers with both door mounted and top mounted lint screens and I'd never consider owning one now without the top mount screen. Its nice to have the ability to clear the screen while the machine is running. With new towels and other linty loads, it's handy to clean screen mid-way through the cycle to speed drying. Also its much cleaner to be able to clear the screen with the dryers airflow to evacuate the fine dust cloud. With the door mount screen where does that dust go when you clean the screen??
Previously I was using an early 70's Kenmore dryer that started life as an electric. John changed out all the parts and converted it to gas about 1979 or there about. It ran perfectly with nothing more then minor maintenance until it was replaced with a late model Cabrio gas dryer a couple years back. The old Kenmore is still drying to this day in my friends basement as his daily driver. The old Whirlpool design has sure proved itself time and time again over the years. |
Post# 670268 , Reply# 20   4/3/2013 at 14:56 (4,012 days old) by neptunebob (Pittsburgh, PA)   |   | |
Checkrate/Likes
 
     
|