|
Thread Number: 47780
Horrible Maytag "Damich" |
[Down to Last] |  |
| Post# 693549 7/31/2013 at 20:39 (3,919 days old) by mickeyd (Hamburg NY) | ||
 | ||
|
| Post# 693550 , Reply# 1 7/31/2013 at 20:45 (3,919 days old) by mickeyd (Hamburg NY) | ||
|
Started out so innocent, yesterday around noon. | ||
| Post# 693552 , Reply# 2 7/31/2013 at 20:52 (3,919 days old) by mickeyd (Hamburg NY) | ||
|
I thought, Oh I hope I can get | ||
| Post# 693554 , Reply# 3 7/31/2013 at 21:00 (3,919 days old) by danemodsandy (The Bramford, Apt. 7-E) | ||
Agitator Riding Up?
I briefly had this problem with my Almond 806 washer - the problem was that the agitator wasn't seated correctly on the shaft. This left a small space between the agitator's skirt and the tub, ready to catch and fray and rrrrrip!
Removing the agitator and reseating it correctly resolved the problem. Hope your resolution is that simple. | ||
| Post# 693555 , Reply# 4 7/31/2013 at 21:02 (3,919 days old) by mickeyd (Hamburg NY) | ||
|
Next load in,
I put it to soak at about 2 o'clock, by pressing the dial in. Then at 3 just before leaving for a bike ride, I ran out to the deck to grab the do-rags I wear when swimming on windy days so the kite surfers can easily see my head bobbing between the swells, and not run me over. Threw the kerchiefs into the machine, and pulled the main dial out which was still in the "Suds Return position, just to let them agitate a minute before leaving.
| ||
| Post# 693556 , Reply# 5 7/31/2013 at 21:05 (3,919 days old) by danemodsandy (The Bramford, Apt. 7-E) | ||
|
Huh? | ||
| Post# 693557 , Reply# 6 7/31/2013 at 21:08 (3,919 days old) by mickeyd (Hamburg NY) | ||
|
| ||
Post# 693562 , Reply# 7 7/31/2013 at 21:17 (3,919 days old) by Kenmore71  (Minneapolis, MN) |
||
 | ||
| Post# 693564 , Reply# 8 7/31/2013 at 21:23 (3,919 days old) by mickeyd (Hamburg NY) | ||
|
The Infinite Wash Cycle, Courtesy of Maytag
I SWORE I hit the dial to stop the agitation after putting the head hankies, now known as the head case hankies, into the machine and letting them go a bit. Did the garage mouse I've befriended, hit the dial on me?
Those poor sorry clothes were "warshed and warshed" for almost to and a half hours. I know that Chinese laundries used to wash clothes "a good hour." Once had a fool-proof method for maintaining whitest whites by washing for an hour in the Easy on G E N T L E.......... H E L L O O O O O O. Also,this load could also have stood a bit more water. Well, the Infinite Wash Cycle sure works. Except for the items in pic 1, and a lot of white lint on the deck after the shake and hang, everything else was fine. Just going to keep my eye on the items to see if any of them wear out too soon. As the French say: " Tout est bien que finit bien." All's well that ends well. 
| ||
| Post# 693567 , Reply# 9 7/31/2013 at 21:39 (3,919 days old) by mickeyd (Hamburg NY) | ||
|
Sandy, the agitator is as tight as a drum, and gap-free, but thanks. I don't know enough to know if the dial is a replacement, but I doubt it . Will ask Ross next time around.
Mark, I'm the dunce here not Maytag; other machines might have done far worse. Indeed, the 806 Suds has become one of the machines I would take to the proverbial island. Gentlemen, the wonders of the 806 S never cease. Yesterday was the first time I actually saved suds. And during the spin, the valve clangs shut at the exact same second the spray rinse begins. Amazing split-second timing. Seeing that and the first rinse water shooting out the "other" hose was enlightening and riveting. 
| ||
|
Post# 693572 , Reply# 10 7/31/2013 at 22:49 (3,919 days old) by Wayupnorth (On a lake between Bangor and Bar Harbor, Maine) |
||
NEVER
Leave any appliance running when not right there at home. Too many people left dryers going and burnt down their house or washer hoses that decided to burst since they were not turned off. Worth the 2 seconds of caution to prevent a lot. Even though my old Maytags are almost 30, I am right there with them when running.
| ||
|
Post# 693592 , Reply# 11 8/1/2013 at 07:17 (3,918 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
MAYTAG SUDS-SAVERS I have always wondered why MTs suds return position on the timer dial did not advance either into the normal cycle or to an off position like other SS washers. We speculated that they wanted to allow the user to set it on suds return for and extended wash time like users of wringer washers could.
While any agitator washer probably would do some damage to a load allowed to wash for 2 1/2 hours this washer was already the hardest on clothing of any 1970s agitator machine., one of the reasons that MT only allowed a 10 maximum wash time to start with.
While I have spent countless hours watching my machines run, I also expect them to be reliable and often leave even the vintage machines running when I leave either the area or the house altogether. Life to too full of important and fun things to be tied to an appliance, after all this is the promise that these appliances made when they were sold and I am holding them to it. | ||
|
Post# 693596 , Reply# 12 8/1/2013 at 08:31 (3,918 days old) by Tomturbomatic (Beltsville, MD) |
||
|
My 806 washer and dryer have this knob, dial & panel color combination. That is the way they came and even the pictures in the instructions show it this way. | ||
| Post# 693624 , Reply# 13 8/1/2013 at 12:16 (3,918 days old) by mickeyd (Hamburg NY) | ||
|
That's the killer, Tim. I swore I pressed the dial in. It had to have been the mouse. Wouldn't dream of leaving a conventional on to wash for two hours while I was out biking. But automatics, dishwashers, dryers--have left them running and gone out all my life without disaster.
John, I thought the same thing. Wash long like a wringer. It even sounds like the conventional when washing, the same low percussive RUM rum RUM run RUM rum. Thought it looked too pretty and natural to have been a replacement, Tom | ||
|
Post# 693673 , Reply# 14 8/1/2013 at 16:39 (3,918 days old) by Frigilux (The Minnesota Prairie) |
||
 | ||
|
Post# 693680 , Reply# 15 8/1/2013 at 17:28 (3,918 days old) by CircleW (NE Cincinnati OH area) |
||
|
Sandy, the Maytag set my mom bought in '73 has the white dial, acrylic knob, and blue panel. The washer was an A207 (gave away), and the dryer is a DE406 (still have). | ||
| Post# 693685 , Reply# 16 8/1/2013 at 18:15 (3,918 days old) by danemodsandy (The Bramford, Apt. 7-E) | ||
|
Tom & CircleW: | ||
| Post# 693686 , Reply# 17 8/1/2013 at 18:23 (3,918 days old) by mickeyd (Hamburg NY) | ||
|
Laughing out loud, literally
That's probably the funniest pic I've seen in a month. What a delight and what a surprise.
The other day, I mislaid the garage door opener, and popped off one of the cushions on the short couch on front of the washers, looking for it. There, eyeballing me straight on was a fine healthy gray mouse. I smiled at him and said, "Don't worry....I'm just looking for the opener." He watched as I removed the the other cushion, then ran back and forth and out the back where the pop-up footrest mechanisms are. He's been greeting me ever since I let him live. I guess your pic is not just funny but prescient, because I'm certain his friends are on the way; however, any more Infinite Wash Shenanigans, and out they go. Thank You, Eugene | ||
|
Post# 694146 , Reply# 18 8/4/2013 at 11:28 (3,915 days old) by Jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers) |
||
Mikey Go see the thread below 1- 18 hour jeans!!
I totally agree with MS today! These machines are marked automatic and thats what they have to do!!
www.automaticwasher.org/cgi-bin/T... | ||
|
Post# 694149 , Reply# 19 8/4/2013 at 11:43 (3,915 days old) by gansky1 (Omaha, The Home of the TV Dinner!) |
||
 | ||
| Post# 694398 , Reply# 20 8/5/2013 at 12:42 (3,914 days old) by mickeyd (Hamburg NY) | ||
|
"I totally agree with MS today! "
Any day then Mother Superior and Mother General are in agreement is a great day. LOL
Comforting and fun to learn that all across the land, at any given moment, men are staying with their washing machines, never leaving them alive and alone at risk to mechanical attack. I put your thread up because it's too good for anyone to miss. | ||
|
Post# 694408 , Reply# 21 8/5/2013 at 13:52 (3,914 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers) |
||
|
Mother | ||
|
Post# 694414 , Reply# 22 8/5/2013 at 14:25 (3,914 days old) by turquoisedude (.) |
||
Good heavens... This is a good lesson for Suds-Save neophytes like myself!!
Not sure if this is how it was meant to be used, but I when I am using the '51 Kenmore suds return, I tend to wait until the tub has filled up, then add clothes... I noticed during the shakedown testing of this washer that the agitation starts as saved wash water begins to flow back into the tub and, being ever fearful of overloading a vintage washer, I was afraid of damaging the machine by letting it start churning with a half-tub of water. Not sure if this is what all KM/WP suds-savers of the era did, but if the water level is not quite high enough after the return of the suds, the agitation stops and the water continues to flow in until a 'full' level is tripped... Michael, take heart, your handkerchiefs are now air-conditioned... (ducks and runs) | ||
| Post# 694463 , Reply# 23 8/5/2013 at 17:44 (3,914 days old) by mickeyd (Hamburg NY) | ||
|
And the buck stops
At Mother General Jon Charles De Mille , LOL.
Paul, it's so soft and well-worn, a dear favorite, I still wear it just fine, the edges needing just a little tuck. It's actually roomier. Now, if they were bloomers.......well, that's another tale. Directions I have read in KM lit says to wait till all the water has been returned before adding clothes, and the agitator always starts with the glorious clang of the suds bell. We're still waiting to learn what Norge, Kelvi, etc. do on their suds-back cycle, as it was called on he Kelvi. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
