|
Thread Number: 48393
I got my KDS-19 hooked up |
[Down to Last] |  |
|
| Post# 701227 , Reply# 1 9/4/2013 at 19:45 (3,885 days old) by thevacuumman (Fritch, Texas) | ||
|
Inside 
| ||
| Post# 701230 , Reply# 2 9/4/2013 at 19:48 (3,885 days old) by thevacuumman (Fritch, Texas) | ||
|
Top rack has some rust damage that I need to eventually fix or I might replace the top rack 
| ||
| Post# 701234 , Reply# 3 9/4/2013 at 19:51 (3,885 days old) by thevacuumman (Fritch, Texas) | ||
|
Data plate Model: KDS-19 Serial: 201293188 Made by Hobart Troy, Ohio 
| ||
| Post# 701242 , Reply# 4 9/4/2013 at 20:13 (3,885 days old) by william637 (Damp pants? Not a chance. ) | ||
Great Machine
I have one in my basement that I have water tested. Everything works fine but the fill solenoid leaks (I have several kitchenaids all with the same solenoid leak). One of these days I will get around to fixing that. That machine and my push-button maytag reverse-rack are contenders for the daily drivers in my kitchen.
| ||
| Post# 701247 , Reply# 5 9/4/2013 at 20:51 (3,885 days old) by danemodsandy (The Bramford, Apt. 7-E) | ||
If You....
....Replace that top rack, I bet your mom might be more willing to use the KA instead of the GE.
Ladies. No. Like. Rust. But after that's addressed, her attitude might well change. There is many a mom out there who would be very grateful that her resourceful son would fix up a quality vintage appliance at little cost instead of her having to buy a new one to replace one that's giving trouble. | ||
| Post# 701253 , Reply# 6 9/4/2013 at 21:13 (3,885 days old) by bogo (montreal) | ||
|
rusted racks It could be long to find a top rack in good shape. I've fixed mine with silicone tape about 8 month ago. It looks a bit special but the tape did not deteriorate at all. 
| ||
| Post# 701391 , Reply# 7 9/5/2013 at 15:13 (3,884 days old) by jkbff (Happy Rock, ND) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
