|
Thread Number: 49195
Whirlpool wih Maytag agitator |
[Down to Last] |  |
|
Post# 712087 , Reply# 1 10/29/2013 at 13:02 (3,824 days old) by DADoES  (TX, U.S. of A.) |
||
 | ||
| Post# 712100 , Reply# 2 10/29/2013 at 13:49 (3,824 days old) by stovokor () | ||
|
Hey DADoES, Thank you very much. I used Google Images and those look like what we're looking for. | ||
|
Post# 712103 , Reply# 3 10/29/2013 at 14:23 (3,824 days old) by YoGiTuNeS (New Jersey) |
||
Actually...take the spiral part off your current agitator, and you pretty much have a Maytag powerfin, at least for your machine....but you can only wash up to medium size loads at a time...
even something like this would work.... CLICK HERE TO GO TO YoGiTuNeS's LINK on eBay 
| ||
|
Post# 712104 , Reply# 4 10/29/2013 at 14:26 (3,824 days old) by YoGiTuNeS (New Jersey) |
||
|
even this one with the removable center barrel lint filter
CLICK HERE TO GO TO YoGiTuNeS's LINK on eBay 
| ||
|
Post# 712105 , Reply# 5 10/29/2013 at 14:30 (3,824 days old) by YoGiTuNeS (New Jersey) |
||
|
another style that would fit a direct drive as well....
CLICK HERE TO GO TO YoGiTuNeS's LINK on eBay | ||
| Post# 712121 , Reply# 6 10/29/2013 at 15:31 (3,824 days old) by stovokor () | ||
|
Any chance those agitators have a little less height than the original corkscrew with the caps off? Some height is nice, but just maybe 2 to 3cm less would be awesome. | ||
|
Post# 712130 , Reply# 7 10/29/2013 at 16:38 (3,824 days old) by YoGiTuNeS (New Jersey) |
||
|
reply number 5 is about as short as your gonna get......otherwise, just take your spiral off, you can't go much lower for the agitation post height of the tranny!
you can purchase one like this, but you already have it when your is taken apart....not sure why you would want to go lower..... you can try one from a D2000 24inch model, with smaller vanes on the base, but thats about it.... CLICK HERE TO GO TO YoGiTuNeS's LINK on eBay | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
