|
Thread Number: 49556
1950s GE Turquoise Stove and Oven |
[Down to Last] |  |
Post# 716549 11/20/2013 at 15:33 (3,803 days old) by ovrphil  (N.Atlanta / Georgia ) |
||
 | ||
|
|
Post# 716557 , Reply# 1 11/20/2013 at 15:55 (3,803 days old) by ovrphil (N.Atlanta / Georgia ) |
||
|
Double posting, sorry. | ||
|
Post# 716597 , Reply# 2 11/20/2013 at 18:09 (3,803 days old) by Tomturbomatic (Beltsville, MD) |
||
|
Where did they get those 8 inch surface units? GE stopped using that pattern in the 8 inch units in the early 50s and those are not genuine Calrods. | ||
|
Post# 716611 , Reply# 3 11/20/2013 at 19:32 (3,803 days old) by akronman (Akron/Cleveland Ohio) |
||
burner Calrod pattern If memory serves me right, we had that GE cooktop in stainless in a 1960 home, and I replaced at least 3 burners thru the years, and remember that pattern. 3 or 4 wires to the ceramic junction, and the cooktop directions talked about how lowest heat was 120 around the outside edge, next up was 120 around the inside. 6 buttons for 5 heats and off. | ||
|
Post# 716664 , Reply# 4 11/20/2013 at 22:20 (3,803 days old) by ovrphil (N.Atlanta / Georgia ) |
||
|
That's probable, since burners were often replaced - this one sold on eBay seems to have the non-original Calrod burners, as well.
And here, the same story: for-sale.yowcow.com/listing/43593... But then there is a Retromania.com GE stovetop appears to have the original Calrods: retrorenovation.com/2010/04/17/vi... (third picture down from top, clickable to enlarge) - CA. 1959. So , good eye if those weren't the original calrods on the turquoise cooktop. CLICK HERE TO GO TO ovrphil's LINK on eBay 
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
