|
Thread Number: 49560
Candy |
[Down to Last] |  |
| Post# 716584 11/20/2013 at 17:17 (3,802 days old) by optima (Cumbria England) | ||
 | ||
|
| Post# 716587 , Reply# 1 11/20/2013 at 17:19 (3,802 days old) by lavamat_jon (UK) | ||
|
The door lock delay? | ||
| Post# 716690 , Reply# 2 11/21/2013 at 01:43 (3,802 days old) by laundromat (Hilo, Hawaii) | ||
 | ||
| Post# 716716 , Reply# 3 11/21/2013 at 04:37 (3,802 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
Powerjet or Motor? | ||
| Post# 716739 , Reply# 4 11/21/2013 at 07:05 (3,802 days old) by servisslimline (England, Brighton & Hove) | ||
Sealed cabinet
The fact that the front looks removable until you look harder and discover its welded? The fact the lid on the machine is so awkward to put on?
Cottons nowadays, the prewash cannot be canceled unless you chose the colours programme? The door being difficult to shut on models with button release? Phil | ||
Post# 716742 , Reply# 5 11/21/2013 at 07:34 (3,802 days old) by chestermikeuk  (Rainhill *Home of the RailwayTrials* Merseyside,UK) |
||
I would say | ||
| Post# 716792 , Reply# 6 11/21/2013 at 12:04 (3,802 days old) by aquarius1984 (Planet earth) | ||
 | ||
| Post# 716870 , Reply# 7 11/21/2013 at 16:05 (3,801 days old) by optima (Cumbria England) | ||
|
| ||
| Post# 716881 , Reply# 8 11/21/2013 at 16:59 (3,801 days old) by Haxisfan (Europe - UK / Italy) | ||
The welded front cabinet really puts me off...
I should know about all these little things you guys mentioned... having two Hoovers at home, but the most irritating one of all is that sealed cabinet!
I often thought about venturing into changing the bearings in the Hoover Nextra one of these days... as they've been rumbling slightly for a while, although, as strange as it might seem, they haven't got any worse as yet! I've seen videos on YT on bearings change in a Bosch and a Hotpoint and they make it seem easy as a piece of cake... I wish they did it with a Hoover/Candy. Has any of you replaced them on one of these a sealed cabinet machines? Can I turn to you for advice should I ever consider such possibility? I don't think I'll ever have the patience though :-P | ||
| Post# 716898 , Reply# 9 11/21/2013 at 17:39 (3,801 days old) by glenfieldmathk1 (Glenfield-Leicester-UK) | ||
|
I'm sure my grans Hoover had numerous bearing replacements in its life before her Whirlpool. A Hoover Performer AB130. It didn't take them too long, though never payed attention as to how they initially got the drum/tub out. Its probably like the round door Hotpoint's you have to unclip the bottom and lift it out? | ||
| Post# 716910 , Reply# 10 11/21/2013 at 18:09 (3,801 days old) by optima (Cumbria England) | ||
|
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
