Thread Number: 49605
NEED LOVING HOMES FOR SOME APPLIANCES HERE IN OHIO |
[Down to Last] |
Post# 717218   11/23/2013 at 05:39 (3,805 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
need to get rid of some stuff here!
my bendix front loader I will sell for $100.00. worked fine last time I tried it, does leak around door seal but what can I say, it's about 65 years old! my speed queen wringer I will give away. has a leak around center post that I will never get to. other than that looks fine. have 2 Frigidaire dryers from the 60's I will give away. one is a 63 model! maytag jet clean dishwasher I will give away. works great! it is not the belt driven model. I have too many kds-17a's and will sell one for $100.00. these have not been worked on by me, but parts are out there and I have yet to encounter one that I could not fix so i'm sure you could too! would also be open to a trade for the 2 machines I am selling. do not have internet at the moment, decided to get myself off the web for awhile and get back to basics. check this site weekly from a friend's computer. can also phone me at 513-501-4801 thanks pete |
|
Post# 717219 , Reply# 1   11/23/2013 at 06:32 (3,805 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 717223 , Reply# 2   11/23/2013 at 07:13 (3,805 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
1    
|
Post# 717227 , Reply# 3   11/23/2013 at 08:00 (3,805 days old) by jeb (Mansfield Ohiio)   |   | |
Checkrate/Likes
 
     
Hi Rollermatic - Jeb from Ohio I would be interested in the Bendix and what are you looking for trade? |
Post# 717238 , Reply# 4   11/23/2013 at 08:56 (3,805 days old) by wringer (x)   |   | |
Checkrate/Likes
 
     
I may be interested in the SQ wringer. Can you tell me more about it? Thanks!! You can tell me about it in the club mail system if you wish. Jim |
Post# 717311 , Reply# 5   11/23/2013 at 19:04 (3,804 days old) by rberryiii3 (Palm Springs, California)   |   | |
Checkrate/Likes
 
     
I am interested in the Bendix if jeb passes on it Rob, Palm Springs |
Post# 717346 , Reply# 6   11/23/2013 at 22:41 (3,804 days old) by whirlcool (Just North Of Houston, Texas)   |   | |
Checkrate/Likes
 
1    
Those Maytag Jet Clean dishwashers do clean really great. I hope somebody here will give it a home. |
Post# 717412 , Reply# 7   11/24/2013 at 12:00 (3,804 days old) by bendixmark (Winchester Mass)   |   | |
Checkrate/Likes
 
     
I would be interested in the Bendix also if they both pass on it,Mark |
Post# 717869 , Reply# 8   11/26/2013 at 14:48 (3,801 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
checkin my e mail here and this site as well. paul, the frig dryer is one i got from maryland when i went to buy a rollermatic from a member several years ago. gave him 50 bucks for it but as said will gladly give it away. it's in my shed/barn out back will check it out and post a response here in a few days. there may be a thread on it from a couple years ago, can't remember. if you need parts take em both!
the speedqueen wringer i got in cleveland about 5 years ago, someone gave it to me. i think there are some pics of it in a thread from 2009 i did on my trip to cleveland and modern parts in parma ohio. i might have used the username "soberleaf" back then. no way i can post pics now as i had internet taken out 10 weeks ago when we were about to bomb syria and i got too fed up with all the news about it! i decided the internet was going and i was geting back to basics, no tv, no internet, just a simple cell phone (for now). that may go too ha ha! anyway the wringer runs and works but leaks in the center area and i did not take the time to look into it. it's free for the taking! the bendix i def did a thread on around 2009-10 era either under soberleaf or rollermatic username. the maytag is a later model but runs perfectly. i will keep it if no one wants it, i switch out one of my dishwashers every six months in my kitchen and run a different one, will prob put it in for awhile. as said i have way to many kitchenaids, over 20 of em and could easily let a 17 model go. pete |
Post# 717870 , Reply# 9   11/26/2013 at 14:52 (3,801 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
not sure if you called or not, my cell phone is a basic 10 dollar job that does nothing more than make calls, no camera, no internet or any of that crap! i did have a call come in that i tried to return but phone said it was restricted, meaning no service in that area. i assume that could have been you. as said i will get stats on that dryer and post them here.
|
Post# 718065 , Reply# 10   11/27/2013 at 11:40 (3,801 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 718572 , Reply# 11   11/30/2013 at 13:08 (3,797 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
been really cold here this week (too cold for me at least) so I have not been able to get to those dryers in my shed in the back. off next week from work so I will def look at them and get model nos. I know I put pics of it on here last year I think, or maybe the year before.
so far I still have everything, decided to keep the maytag for awhile, gonna install it tonite in the kitchen and run it for about 3 mos. or so. it will take the load off my more vintage machines that I don't like to use that much. with it's plastic tub and all, don't have to worry about wearing it out. and it does clean great and has a time delay/sani wash that I like. plus I have a switch on it to turn timer off and on so I can extend any wash and rinse whenever I want. thanks! |
Post# 718584 , Reply# 12   11/30/2013 at 14:56 (3,797 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 718735 , Reply# 13   12/1/2013 at 20:24 (3,796 days old) by wascomat_kid ()   |   | |
Checkrate/Likes
 
     
Can U post pics of the machines for sale? |