|
Thread Number: 51954
Maytag Neptune Help |
[Down to Last] |  |
|
Post# 743614 , Reply# 1 3/20/2014 at 16:10 (3,682 days old) by henene4  (Heidenheim a.d. Brenz (Germany)) |
||
|
Do you have a multimeter? If so, you could check if the PCB sends voltage to the wrong valves during the main fill. If so, the PCB might be faulty. Further, I suppose during the final rinse with softner the bleach dispenser should not be flushed. So you could check if this happens further. Would be a nother sign of a faulty PCB or part of it... | ||
|
Post# 744531 , Reply# 4 3/23/2014 at 16:07 (3,679 days old) by jeff_adelphi (Adelphi, Maryland, USA) |
||
Valve testing-- | ||
|
Post# 745079 , Reply# 5 3/25/2014 at 15:28 (3,677 days old) by Yogitunes (New Jersey) |
||
 | ||
| Post# 745812 , Reply# 6 3/28/2014 at 12:01 (3,675 days old) by neptuneman () | ||
|
I unplugged the valves power and water was still running through them. I tested the machine with another valave from one of my other Neptunes and it it worked fine. So its a bad valve. A new one is on order. Thanks everyone for your help! | ||
| Post# 748397 , Reply# 7 4/7/2014 at 10:25 (3,665 days old) by neptuneman () | ||
|
Replaced the despenser valves and the washer is working perfect! Thanks for everyones help!! | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
