Thread Number: 52725
my new hoover spinarinse
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 750268   4/15/2014 at 12:36 (3,657 days old) by robliverpool (england Liverpool)        

robliverpool's profile picture
Hi guys. I couldn't resist an ebay bargain. Bought this for £10.00. Had a bit of a drive to get it as it was in the middle of no where
Down bumpy roads and the sat nav keep loosing the signal.
I had to replace the rubber pipe with a modern one as it was a bit perished. Done some test runs and no leaks and apart from a bit noisy it runs great

Was wondering if anyone knew the spin speed and also the year it was mad. Just took some pics Inc the plate

Hope u enjoy the pics

Robbie





Post# 750270 , Reply# 1   4/15/2014 at 12:36 (3,657 days old) by robliverpool (england Liverpool)        
pic 2

robliverpool's profile picture
...

Post# 750272 , Reply# 2   4/15/2014 at 12:39 (3,657 days old) by robliverpool (england Liverpool)        
pic 3

robliverpool's profile picture
...

Post# 750283 , Reply# 3   4/15/2014 at 13:03 (3,657 days old) by vacbear58 (Sutton In Ashfield, East Midlands, UK)        
Date and speed

vacbear58's profile picture
From the serial number it looks like August 1989 (1979?) and the spin speed is 1400rpm

Al


Post# 750286 , Reply# 4   4/15/2014 at 13:12 (3,657 days old) by Hoover1100 (U.K.)        
Going by the serial and colourscheme

August 1989

They were sold along with the Hoovermatics and single tub washers until 1993.

I thought the spin speed was 2100, or is that just the hoovermatics?

Matt


Post# 750335 , Reply# 5   4/15/2014 at 16:17 (3,657 days old) by robliverpool (england Liverpool)        

robliverpool's profile picture
I was hoping the spin speed was more as my washer spins at 1400rpm. The lady did offer to give me the washer to match it for free but I already had the car loaded up with other stuff and could fit it in

Post# 750449 , Reply# 6   4/16/2014 at 04:12 (3,657 days old) by autorinse_John (Staffordshire - UK)        
Spin speed and Year

autorinse_john's profile picture
Hi Rob

This was the very last spinarinse model that Hoover made and yours is dated August 1989

The spin speed on a spinarinse is 1800rpm the Hoovermatics are 2300rpm same motors different pulley sizes

Hope this helps

John


Post# 750454 , Reply# 7   4/16/2014 at 05:40 (3,657 days old) by robliverpool (england Liverpool)        

robliverpool's profile picture
Thanks John
That info is much appreciated. I thought it was later than 1979 as the outter tub to catch the water is made from plastic and I had an earlier on many years ago that didn't have an outter tub. The water would just hit the shell of the machine and drain down to the pump.
I've had lots of splashy fun this morning lol. Just wish I wasn't on a water meter as I would prob use it more as it works really well.


Post# 750556 , Reply# 8   4/17/2014 at 02:58 (3,656 days old) by electron1100 (England)        
Toys

electron1100's profile picture
Glad you like this Rob these are great machines easy and fun to use, my mates mum used to wash in it, leave the clothes to soak in powder and then rinse them out..........see many uses.

And if deepthro.... I mean deeprinser jon recommends them you wont get a better endorsement than from him he knows his hoover twinnys


Post# 750563 , Reply# 9   4/17/2014 at 03:23 (3,656 days old) by robliverpool (england Liverpool)        

robliverpool's profile picture
Cheers Gary
It's been great so far. Every appliance I own is brand new except for this so it's nice to own. It was in storage for 20 years and was surprised how well it worked with nothing except the pipe needing replacement. I just wish I wasn't on a water meter as I would of gone back for the matching washer but according to my water bill I'm using twice the amount of water that the average single person uses .... Dam that extra rinse button on the washer lol...


Post# 750687 , Reply# 10   4/17/2014 at 14:06 (3,655 days old) by chestermikeuk (Rainhill *Home of the RailwayTrials* Merseyside,UK)        
Hoover - Who Better....

chestermikeuk's profile picture
Congratulations Robbie, the last of the Oovah SpinaRinse....Nowthen, You turned down the last ever made Hoover washer....get that car unloaded and get through that Mersey Tunnel asap - or redeem yourself and send me an email with the details and will see what I can do..ha ha..

Enjoy, Mike...


Post# 750698 , Reply# 11   4/17/2014 at 15:15 (3,655 days old) by robliverpool (england Liverpool)        

robliverpool's profile picture
Hi mike
I could e mail the lady and see if she still has it as I doubt it would be gone as it wasn't listed. Both machines had been in storage for twenty years. The woman and her daughter were
Lovely. We were chatting away like we had known each other for years lol. I didn't realise it was the last of the hoover singles. I'm more old hotpoint than hoover... And admitting to being a bit of a Beko fan now (ducks head quickly lol)

Will let you know what she says if you would like me to ask her

Robbie


Post# 750699 , Reply# 12   4/17/2014 at 15:26 (3,655 days old) by chestermikeuk (Rainhill *Home of the RailwayTrials* Merseyside,UK)        
Hoover

chestermikeuk's profile picture
Hi Robbie, yes please if you would, I know someone who wants one to match a spinner if you dont want it, Ta..

Post# 750730 , Reply# 13   4/17/2014 at 17:04 (3,655 days old) by hippiedoll ( arizona )        
CONGRATULATIONS!!!

hippiedoll's profile picture
that is a super cool find!!!

if i had to choose between the hoover "washer" (with the pulsator) or the hoover spinner, i would go with the spinner!!!

that is too cool!!!


Post# 750750 , Reply# 14   4/17/2014 at 18:27 (3,655 days old) by robliverpool (england Liverpool)        

robliverpool's profile picture
Hi mike. I will e mail her in the morning. She's in heswall so it's not that far a journey. Didn't realise the toll had gone up through the Mersey tunnels. It's getting a joke the amount they charge... Grr... Greedy Mersey travel lol

Post# 750847 , Reply# 15   4/18/2014 at 03:59 (3,655 days old) by vacbear58 (Sutton In Ashfield, East Midlands, UK)        
Rob

vacbear58's profile picture
The Hoover Twosome (as it appears you are going to end up with) need not be a water hog as you can re-use the wash water for several loads and even after that it can still be used for washing the car, cleaning the patio, that sort of thing. If you have the means you can also save an re-use the rinse water too, I have a hose that i can attach to my pressure washer which allows you to use saved water, although I will admit the pressure is not so good.

When using the washer make sure you dont overload the tub - 6lb is rated capacity but better to stick to between 4 and 5lb - its so quick it hardly makes any difference and load the clothes around the end of the tub when the motor is NOT running - both will help with tangling. Unfortunately the rinse from the spinarinse will not be as good as with the Beko

Happy washing
Al


Post# 750879 , Reply# 16   4/18/2014 at 08:07 (3,655 days old) by keymatic3203 (Cardiff UK)        
Nice one Robbie

Yes get back and get the washer, not one to use on a regular basics, but fun to get the twosome out for an ocasional wash, yes you'll use extra water and energy to heat the water, but at the most this wouldn't come to much more than a pound or so. And where could you have that much fun for that these days.

Also if they ownwers had the matching pair, is it possible the bridge is stored away in the wash tub along with a fill/drain hose.

Eitherway, enjoy your spinarinse.

Mathew


Post# 750910 , Reply# 17   4/18/2014 at 10:49 (3,655 days old) by robliverpool (england Liverpool)        

robliverpool's profile picture
Hi Mathew
I'm just waiting on an e mail back. The spina has been excellent so far. It's been used 3 times today so far. Water everywhere in the kitchen lol.
The kitchen sink can't cope with the amount the machine pumps out so it's fingers on the stop button when I've been rinsing.
I've had it apart and give it a good clean in the bits that's hard to get to. Just need to get some enamel paint to touch up were the is the odd rust spot


Post# 750916 , Reply# 18   4/18/2014 at 10:55 (3,655 days old) by robliverpool (england Liverpool)        
Mathew!

robliverpool's profile picture
Quick question
When it's on full speed is it normal for it to make a rattle noise like the frame is shaking?
It does get a bit loud and I'm wondering if maybe something needs tightning up or maybe some wd40 on it



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy