Thread Number: 54432
Kitchenaid 23 Series dishwasher
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 768204   7/5/2014 at 16:22 (3,575 days old) by stevet (West Melbourne, FL)        

I have this unit listed on Craigslist but if any member from the forum is interested in it, I will remove the ad and deal directly with any inquiries
It seems that not many people in this area are interested in the machine and I would rather sell it to someone who appreciates the unit for what it is than to part it out.
It works fine and does an excellent job of cleaning. And it is a whole lot faster than anything out there these days. But you all already know that!


CLICK HERE TO GO TO stevet's LINK on Daytona Craigslist





Post# 769172 , Reply# 1   7/8/2014 at 15:23 (3,572 days old) by stevet (West Melbourne, FL)        
No takers?

I cannot understand why there has been so little interest in this machine. Is there some unknown fact or facts I am unaware of? Amazingly, the racks are near perfect and no chips in the porcelain at all and it is pretty quiet for an old style Kitchenaid.
Okay it is probably from the early 90's but it doesn't eally look heavily used at all.


Post# 769180 , Reply# 2   7/8/2014 at 15:57 (3,572 days old) by ovrphil (N.Atlanta / Georgia )        
Photo to help the cause

ovrphil's profile picture
here's some pics - you should always add photos anyways, here...even with the link. It's just convenient for the potential shopper.


good luck!


  View Full Size
Post# 769189 , Reply# 3   7/8/2014 at 16:56 (3,572 days old) by funktionalart (Rison, AR)        
I would love to have it...

funktionalart's profile picture
if it wasn't so bloody far away. If only to have the racks! That machine for sale looks like circa 1995-ish late model 23 series. I've got a 1993 (earlier KUDS23 Superba) with black panel and chrome buttons. Hobart with WP pump. I'm sure somebody here will have interest....locally it will sadly probably sit unsold for a little while. Which is craziness!

Post# 769198 , Reply# 4   7/8/2014 at 17:22 (3,572 days old) by funktionalart (Rison, AR)        
Steve...I just had a thought to help you:

funktionalart's profile picture
Spend a few minutes and pull the door trim strip off--see if you have either steel or black panels behind the white. If so, change out the door and lower panel to one of those colors and relist.

That machine will look much more updated to a prospective buyer....these KA machines look much more expensive when they're not white.

Craigslist is FULL of white/bisque appliances and there's a reason for that.


Also offer to demonstrate the machine running if you can.


Post# 769206 , Reply# 5   7/8/2014 at 17:49 (3,572 days old) by DADoES (TX, U.S. of A.)        

dadoes's profile picture
 
I also would like to have it ... but same issue with the distance / transport.


Post# 769210 , Reply# 6   7/8/2014 at 18:39 (3,572 days old) by chachp (North Little Rock, AR)        
Same here.

chachp's profile picture

I am looking for a good machine to put in my house when I sell it so I can take my KDS20 with me.  It's just too far away and I'm sure would be cost prohibitive.

 

I know if you give that machine your blessing it is a good one!!


Post# 769405 , Reply# 7   7/9/2014 at 13:11 (3,571 days old) by stevet (West Melbourne, FL)        
Good Points, Guys!

Allen, the machine actually does have the black panels and I mentioned in the ad that it had the vari-front panels but not everyone knows what that means. I will turn them around and post the pics in the ad and on here.

Ralph, just get in your car and drive down and get the darned machine already. Would you make the trip if I said I had a Superba 22 series available as well?

Thanks, for the input It is much appreciated


Post# 769426 , Reply# 8   7/9/2014 at 14:29 (3,571 days old) by chachp (North Little Rock, AR)        
I would if it was a KDS-14!!!

chachp's profile picture

Especially if it was one YOU had refurbished.  Then I would know I had a winner!!!  Although I would still have the issue of needing one to leave in the kitchen when I sell the house. :)


Post# 813161 , Reply# 9   3/9/2015 at 23:07 (3,328 days old) by bdey01 ()        
Still have this?

What is the specific model number? I am in Gainesville, and would be interested if this was still available. Let me know.

Brian



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy