Thread Number: 56605
Easy Model R |
[Down to Last] |
Post# 789214   10/15/2014 at 21:32 (3,478 days old) by marks (Tucker, GA)   |   | |
Checkrate/Likes
 
     
Hey, does anyone know anything about these REALLY old Easy's? This is a beautiful machine, but how does it all work? It matches my new copper kitchen counter tops and I want it to use as the daily driver. Thoughts?
View Full Size
|
|
Post# 789215 , Reply# 1   10/15/2014 at 21:33 (3,478 days old) by marks (Tucker, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 789267 , Reply# 2   10/16/2014 at 04:28 (3,478 days old) by arbilab (Ft Worth TX (Ridglea))   |   | |
Checkrate/Likes
 
     
Can't duplicate the appearance by searching 'model R', but generally dates to the mid 30s. Suction cup agitator goes up and down, possibly around as well. The part not shown is the spinner.
Looks like jewelry or art, doesn't it? This is actually available? Is it said to operate? Failed parts would almost certainly have to be fabricated, quite expensive. Restored to original operation and with modern detergents this machine would work quite well. Bearing in mind it is manual, the operator pretty much has to stand there the whole time manipulating clothes, levers and hoses. |
Post# 789293 , Reply# 3   10/16/2014 at 10:14 (3,478 days old) by marks (Tucker, GA)   |   | |
Checkrate/Likes
 
     
They say it's operable! It DOES look like jewelry! I've been using an easy (1948 model) for the last 4 years, so i'm used to it and enjoy using it!
I think i'm going to go for it! I'll post some pics of the spinner. |
Post# 789311 , Reply# 4   10/16/2014 at 12:57 (3,478 days old) by rp2813 (Sannazay)   |   | |
Checkrate/Likes
 
     
|
Post# 789312 , Reply# 5   10/16/2014 at 12:59 (3,478 days old) by marks (Tucker, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 789313 , Reply# 6   10/16/2014 at 13:02 (3,478 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)   |   | |
Checkrate/Likes
 
     
That machine is just stunning. Just Stunning. Stunning. Did I say Stunning ...
So Pristine. I hope you get it. Please make a video if you do. Good Luck. Here is a link to it's washing action CLICK HERE TO GO TO toploader55's LINK |
Post# 789323 , Reply# 8   10/16/2014 at 14:30 (3,478 days old) by luxflairguy (Wilmington NC)   |   | |
Checkrate/Likes
 
     
Correction: it's Lee Maxwell's AWMM. |
Post# 789426 , Reply# 9   10/17/2014 at 03:52 (3,477 days old) by arbilab (Ft Worth TX (Ridglea))   |   | |
Checkrate/Likes
 
     
That's as close to new/unused or FULLY restored as possible. It GLEAMS.
Some pics handy of your 48? It would resemble grandma's from 51~53. I had to smuggle my plastic/Chinese twinny into this building that prohibits private laundry eqpt. The last one I had was a 73 Panasonic, very good machine in all regards. Offset impeller didn't knot sheets like the Chinny does. |
Post# 789455 , Reply# 10   10/17/2014 at 09:58 (3,477 days old) by lamont ()   |   | |
Checkrate/Likes
 
     
there is one of those on the local CL for 125. CLICK HERE TO GO TO lamont's LINK on Buffalo Craigslist |
Post# 789493 , Reply# 11   10/17/2014 at 17:49 (3,476 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
I had one years ago, a real heavy beast. But those cups have me wondering, they usually were nickel plated not copper. I think the nickel my have been polished off.
Other wise the spin basket looks mint. It looks low use. The later models had a extra clutch that rotated the cups as they went up and down, the earlier ones just went up and down, I think pre-1919.
|