|
Thread Number: 56773
/ Tag: Vintage Dishwashers
OK. I'm stumped! |
[Down to Last] |  |
Post# 790853 10/27/2014 at 17:01 (3,462 days old) by chachp  (North Little Rock, AR) |
||
How in the heck do I change this roller?
I have a KDI-57 with a broken upper rack roller. I have the new roller but imagine my surprise when I pulled out the rack and noticed there was a screw to turn off to change the roller. I tried an Allen wrench thinking it might work but there are no ridges.
Can anyone tell me how I get the broken one off so I can put on the new one? Sorry for the blurry photo but it's a tough angle to photograph.
Thanks. | ||
|
|
Post# 790854 , Reply# 1 10/27/2014 at 17:08 (3,462 days old) by rp2813 (Sannazay) |
||
 | ||
| Post# 790864 , Reply# 2 10/27/2014 at 18:56 (3,461 days old) by marty (Central Point, Oregon) | ||
|
Stumped I believe they have a screw head on the outside of the tub.. You must remove the sheet metal on the outside of the dishwasher, to access them. Or remove tub obviously. | ||
|
Post# 790869 , Reply# 3 10/27/2014 at 19:24 (3,461 days old) by chachp (North Little Rock, AR) |
||
|
I was afraid of that! | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}