Thread Number: 57714
/ Tag: Modern Dishwashers
New kenmore dishwasher only does 1 rinse now |
[Down to Last] |
|
Post# 801326 , Reply# 1   12/28/2014 at 21:57 (3,378 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
|
Post# 801327 , Reply# 2   12/28/2014 at 22:00 (3,378 days old) by washerdude (Canada )   |   | |
Checkrate/Likes
 
     
I do. I use normal with with high temp on. That seems like the only way to get stuck on food off properly. |
Post# 801328 , Reply# 3   12/28/2014 at 22:02 (3,378 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
|
Post# 801329 , Reply# 4   12/28/2014 at 22:04 (3,378 days old) by washerdude (Canada )   |   | |
Checkrate/Likes
 
     
Thanks for the answer, i'll try that! |
Post# 801330 , Reply# 5   12/28/2014 at 22:06 (3,378 days old) by Iheartmaytag (Wichita, Kansas)   |   | |
Checkrate/Likes
 
     
|
Post# 801334 , Reply# 6   12/28/2014 at 23:14 (3,378 days old) by murando531 (Augusta, Georgia - US)   |   | |
Checkrate/Likes
 
1    
Sounds about right for that design. I'm actually surprised it does two prewashes on a Normal Cycle. All Whirlpool built dishwashers since the Voyager platform would start with the Main Wash, unless the sensor decided the water was so cloudy that it needed a drain and refill, and even then only one prewash was the max on the Normal cycle. One rinse is typical as well, with only a purge between the MW and rinse.
I agree with appnut; just use the highest/longest cycle. |