|
Thread Number: 59033
/ Tag: Vintage Automatic Washers
Kenmore waterfall filter hose 91769 |
[Down to Last] |  |
| Post# 816005 3/26/2015 at 22:11 (3,317 days old) by ladyk (Tacoma) | ||
|
Anybody know where I can find one of these hoses? Unfortunately mine broke at the bend where it mounts to the filter housing. Not much room to route a heater hose. Any suggestions are appreciated! Thank You!!!! | ||
|
Post# 816028 , Reply# 1 3/27/2015 at 03:34 (3,317 days old) by Yogitunes  (New Jersey) |
||
for to someplace like Lowes, a dishwasher hose with that 90 degree bend in it on one end works great...
it may be too long, but you can cut it, and also grab one of those dishwasher sink connectors, that will adapt that hose to the port of the pump.... ashame its not the right length, it would fit perfect, but we improvise CLICK HERE TO GO TO Yogitunes's LINK | ||
|
Post# 816029 , Reply# 2 3/27/2015 at 03:37 (3,317 days old) by Yogitunes (New Jersey) |
||
|
so you may have to get one of these connectors to shorten it and connect to the pump...
you could almost route the hose along the top as to not have to disconnect everytime you open the top, but for some reason it wants to dribble water towards the filter during the spin and saturate the load.....it has to hang inside just like the original... hope this helps....shop around for pricing, but this will get you in the right direction... CLICK HERE TO GO TO Yogitunes's LINK | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
