Thread Number: 60008  /  Tag: Modern Automatic Washers
Frigidaire Gallery Series Washer
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 826637   6/4/2015 at 20:47 (3,220 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

After taking a breather, I'm baaaaack. And this is the culprit, A Frigidaire Gallery MOD. FWS777GH50 Serial: XC10516208. I am guessing Jan. 2001 manufacture. Another basement find. Seems to work, BUT when filling, about halfway in the tub, it starts to leak, a lot. I spinned out the water and removed the front cover. The leak appears to come from directly under the tub seal. The worst possible scenario.

 

20150604 211900

20150604 211918

 

20150604 211946


 

 





Post# 826638 , Reply# 1   6/4/2015 at 20:51 (3,220 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

I know, doesn't look promising.

 

20150604 211052

 

20150604 211256

 

20150604 211212

 

20150604 211153

 

20150604 211142


Post# 826646 , Reply# 2   6/4/2015 at 22:17 (3,220 days old) by Lorainfurniture (Cleveland )        

Tub seal is relatively easy on this machine if I remember. You don't even have to remove the outer tub. I believe the tub seal is like $20.

I never really liked this style machine but I will say they run forever.


Post# 826650 , Reply# 3   6/4/2015 at 22:33 (3,220 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

This seems to be the answer. Doesn't look difficult at all.

 





Post# 826670 , Reply# 4   6/5/2015 at 01:35 (3,220 days old) by washdaddy (Baltimore)        

That does seem like a relatively easy repair to do on the machine provided you line everything up correctly and follow the proper procedures.

 


Post# 826676 , Reply# 5   6/5/2015 at 03:56 (3,220 days old) by whirlcool (Just North Of Houston, Texas)        

Not a bad repair job at all. Looks like maybe a couple of hours and that's it.

Post# 826713 , Reply# 6   6/5/2015 at 10:40 (3,219 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Leaking Main Seal On A WCI- Frigidaire TL Washer

combo52's profile picture

Yes it is fixable, BUT why would you ?

 

We never fix this problem for our customers unless the washer is part of a more expensive stack W&D and even then 90% of people replace the whole thing because they know its junk.

 

Overall this washer design is rather trouble prone, the seal leak is just one of many serious problems these machines experience. We see a lot of transmission oil leaks, also lower trans bearing and one way clutches, bad motors, timers and problems with lid locks to name a few of the more common problems.

 

These washers are poor at turn over and capacity for the amount of water used, while still being very on clothing. About the only thing good about this one is at least it is the later design with neutral drain, these machines with spin drain were real dogs as the pump would air-lock and suds-lock and often struggle for 10 minutes while trying to do the final spin and WCIs solution was to make the final spin 16 minutes long LOL.


Post# 826717 , Reply# 7   6/5/2015 at 12:14 (3,219 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Well John I look at these repairs as a learning experience. It's a cheap, easy fix and I'm not keeping it, so why not. As far as I can tell, this is the only issue it has. That's not bad for a 14 year old washer. To  be honest, I get a kick putting something back into service. smile


Post# 826781 , Reply# 8   6/5/2015 at 23:39 (3,219 days old) by supersurgilator (Indiana)        

I'm glad u are attempting to fix this machine. Yeah it might be old and not excellent at washing, but it is still better then some of what is on the market today.

Post# 826782 , Reply# 9   6/5/2015 at 23:52 (3,219 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Thanks Bruce. Already ordered the OEM kit. Just $13.00. It's dirt cheap.


Post# 826790 , Reply# 10   6/6/2015 at 02:50 (3,219 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
yeah, may not be THE best choice for a machine, but I have to agree, I would do it for the experience and something fun to play with for a while, it is a traditional machine with full water levels, and it did survive 14 years of use.....that has to say something for it......

besides, its lasted a lot longer than most Cabrios, and have you priced seals and bearings for one of those.....not to mention the teardown, and special tool?...


Post# 826814 , Reply# 11   6/6/2015 at 09:57 (3,218 days old) by Tomturbomatic (Beltsville, MD)        

I wonder how easy that repair would be on a 14 year old machine that did not look like new; that had corrosion of the metal parts, mineral buildup that would have to be cleaned up to ensure a good seal on the new parts, etc. I realize that they would show the repair done on a clean machine, but it sure is not preparing most people for what they would find when they went into a typical machine. And, usually, when a tub seal leaks there is rust, corrosion and other damage below it that has to be replaced because often, the leaks start small and the machine is used until the big gush takes them out of service.

Why is the pressure switch hose attached to the tub ring? When it was removed, I did not see anything like an air dome to which most pressure switch hoses attach lower down on the outer tub.


Post# 826820 , Reply# 12   6/6/2015 at 11:01 (3,218 days old) by DADoES (TX, U.S. of A.)        

dadoes's profile picture
 
Appears the pressure hose anchors to a clip on the tub ring for stability purposes on its way down to the air dome on side of the tub.  The hose must be detached from the tub ring so the ring can be removed for the repair.


Post# 826821 , Reply# 13   6/6/2015 at 11:02 (3,218 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Obviously, if the machine looked like a basket case it never would had made it out of the basement. As you can see, the transmission housing is rusty. But it appears to be just surface rust. Everything else seems fine. According to the parts diagram, the pressure switch hose is where it's supposed to be. We'll soon find out what happens on it's maiden wash. Stay tuned.




This post was last edited 06/06/2015 at 12:46
Post# 826823 , Reply# 14   6/6/2015 at 11:16 (3,218 days old) by mrb627 (Buford, GA)        
And Hey...

mrb627's profile picture
After you have fixed it, you can always donate it to the battered women's shelter or some other group. I'm certain that someone out there would be THRILLED to have it.

Malcolm


Post# 826860 , Reply# 15   6/6/2015 at 18:30 (3,218 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Leaking Main Seal On A WCI- Frigidaire TL Washer

combo52's profile picture

Hi Louie, I do agree with your reasoning about fixing this machine. Jason and I have fixed many machines that we knew were not really worth fixing for the experience. By doing this we can give first hand advice to customers about the feasibility of doing certain major repairs.

 

The problem for us is that we guarantee every used appliance for a full year parts and labor with in home service, AND when I consider whether I should fix and resell a machine my goal is that it should last an average of ten years or more, so it does not make sense to put even an hour of labor into a machine that probably won't last more than a few years.

 

Let us know how it comes out.

 

John L.


Post# 827599 , Reply# 16   6/11/2015 at 16:59 (3,213 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

 

Does anyone know how to remove this cap? Does it pop off or screw off? I don't want to force it.

Houston commercial photography

Houston commercial photography


Post# 827615 , Reply# 17   6/11/2015 at 21:12 (3,213 days old) by wiskybill (Canton, Ohio)        
Louis,

IIRC, this piece just pulls out. Mom had a similar washer for a long time
and I know I took the agitator out once, but it was some time ago.
Bill


Post# 827621 , Reply# 18   6/11/2015 at 22:39 (3,213 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Thanks Bill! smile


Post# 828663 , Reply# 19   6/19/2015 at 17:56 (3,205 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Well that's it. I snapped the fucking agitator bolt trying to unscrew it. yell


Post# 828666 , Reply# 20   6/19/2015 at 18:20 (3,205 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
drill it out....and use one of those reverse screw gadgets, may be even apply some heat.....and that bolt should come right out....

give it whirl....can't do much more damage....


Post# 828668 , Reply# 21   6/19/2015 at 18:32 (3,205 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

 

The bolt snapped deep inside. I can only lift the agitator about 3 inches. It feels something else is holding it.

 

20150619 190939


Post# 828669 , Reply# 22   6/19/2015 at 18:45 (3,205 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Leaking Main Seal On A WCI- Frigidaire TL Washer

combo52's profile picture

Hi Louie, You are starting to see why these washers do not enjoy a long life and why very few professionals even try to do major repairs on them. As I may have said before we have repaired enough of these to know better, LOL.


Post# 828671 , Reply# 23   6/19/2015 at 19:04 (3,205 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

John, I'm not looking at this as a business, but as a learning experience.

 

I think I twisted the bolt the wrong way and snapped it. In theory, once the head of the bolt is gone, the agitator should lift out. From what I have read, there is nothing else retaining the agitator. I'm going to pour some very hot water in the tub to see it that helps.


Post# 828674 , Reply# 24   6/19/2015 at 20:04 (3,205 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
I like penetrating fluid myself....

might work on that agitator as well......


Post# 828759 , Reply# 25   6/20/2015 at 09:22 (3,204 days old) by super32 (Blackstone Massachusetts)        

super32's profile picture
Oh Yogi.....lmao

Post# 828791 , Reply# 26   6/20/2015 at 14:13 (3,204 days old) by murando531 (Augusta, Georgia - US)        

murando531's profile picture
Despite the experiences some have had with these WCI-Frigidaires, it's actually one of my favorite designs, solely because of the one my aunt owns. Bought in '99, it's been running anywhere from once to three or four times a day with two adults and four kids, now three kids and one grandchild. The one and only problem she has had was two years ago, when the pressure sensor tube popped off the tub and it overfilled. Other than that, it's still running perfectly, and does a great job. Robin is pretty particular with her clothes but doesn't invest as much time as I or others here do when it comes to pretreating and soaking stains, but their clothes always look clean and smell fresh. One of my favorite memories growing up was going to their house and smelling the scent of Gain in the air and hearing the whirr-woo-whirr-woo of that Franklin transmission.

I say fix it if you can and clean it up nicely. It's a fine machine when treated properly and loaded correctly. The build quality is leaps and bounds better than what's on the market today in top loaders.


Post# 829593 , Reply# 27   6/25/2015 at 22:26 (3,199 days old) by Ultramatic (New York City)        

ultramatic's profile picture


Turned out the agitator screw wasn't broken. Just a stubborn agitator. My dad suggested the fulcrum method. Worked like a charm.

20150625 230209

20150625 230222

20150625 230315

20150625 230345


Post# 829596 , Reply# 28   6/25/2015 at 23:03 (3,199 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Now I need to replace a part that went under the agitator. While removing the agitator this disc snapped out, breaking the tabs that held it to the agitator. I read that it's no big deal, since the agitator screw is what secures it to the shaft. Nevertheless, it needs to be replaced since the center ring is badly corroded. Can I replace this part only?

 

20150625 230209

20150625 230315


Post# 829774 , Reply# 29   6/26/2015 at 22:13 (3,198 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

I decided to just repair it. A relatively easy fix. I'm amazed on how much dirt had accumulated under the agitator.


Post# 829803 , Reply# 30   6/27/2015 at 09:24 (3,197 days old) by cuffs054 (MONTICELLO, GA)        

Ultra, I've got a similar washer (stack) I was surprised at what you found under the agravator also. I wonder if Afresh would help clean it up?

Post# 829813 , Reply# 31   6/27/2015 at 10:40 (3,197 days old) by Frigilux (The Minnesota Prairie)        

frigilux's profile picture
Louie--- I have a soft spot for Franklin machines, despite the long-as-your-arm list of reasons not to, and I'm glad you're repairing this one simply for the experience. Keep posting!



Post# 829827 , Reply# 32   6/27/2015 at 12:58 (3,197 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Cuff, it's like this hard. thick layer of grime. It actually comes out in CHUNKS.


Post# 829829 , Reply# 33   6/27/2015 at 13:02 (3,197 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Thanks Eugene. I've removed the inner tub bolts, and the trunnion, drenched it in WD40, but the tub refuses to budge.  I'm pretty sure it's that grime. I'll try very hot water next.


Post# 829861 , Reply# 34   6/27/2015 at 17:06 (3,197 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

No dice with the hot water. Using an industrial cleaner/degreaser now.


Post# 829870 , Reply# 35   6/27/2015 at 18:10 (3,197 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Nothing, still won't budge. Any suggestions would be appreciated.

 

20150627 190511


Post# 829874 , Reply# 36   6/27/2015 at 18:35 (3,197 days old) by stricklybojack (South Hams Devon UK)        

stricklybojack's profile picture
Put it in a dishwasher..

Post# 829875 , Reply# 37   6/27/2015 at 18:53 (3,197 days old) by cuffs054 (MONTICELLO, GA)        

Pressure washer?

Post# 829887 , Reply# 38   6/27/2015 at 20:09 (3,197 days old) by pdub (Portland, Oregon)        
video

pdub's profile picture
they make it look so easy... hope this helps



CLICK HERE TO GO TO pdub's LINK


Post# 829889 , Reply# 39   6/27/2015 at 20:23 (3,197 days old) by pdub (Portland, Oregon)        
read the comments

pdub's profile picture
See the comments under the video from 1952frenchman. Expand the comment and he goes into great detail!

Post# 829906 , Reply# 40   6/27/2015 at 23:47 (3,197 days old) by Ultramatic (New York City)        
Thanks Patrick...

ultramatic's profile picture

 

 

Frenchman seems to have the answer!


Post# 829974 , Reply# 41   6/28/2015 at 17:50 (3,196 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
the WCI I worked on, of course came out as easy as pie......so I can't help you there....

but I had to use this guys video suggestion when working on the Cabrio......and I was wondering if the agitator shaft was low enough to try this method on your machine Louie....

it is a helpful trick, that really works.....FF to 3:16

just not sure if you have enough clearance for the jack and a board.....but worth a shot.....






Post# 829977 , Reply# 42   6/28/2015 at 19:39 (3,196 days old) by stricklybojack (South Hams Devon UK)        
Oops!

stricklybojack's profile picture
I thought you were asking how to clean the agitator...never mind.

Post# 829987 , Reply# 43   6/28/2015 at 21:10 (3,196 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Great idea Martin, but no, I don't have the clearance. Going to try the method used by Frenchman. Thanks anyway.

 

No worries Robert, already cleaned up the agitator. smile

 

 


Post# 830396 , Reply# 44   7/2/2015 at 00:43 (3,193 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

This did NOT work. The trunnion barely moved. And the basket held tight to the trunnion. Detergent, fabric softener, water and rust make for a powerful cement.

 

20150701 202858


Post# 830397 , Reply# 45   7/2/2015 at 00:48 (3,193 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

So I boiled water, two big stock pots worth, pours it in, and with a lot of pulling, grunting and cursing the basket released.

 

20150702 005752

 

As you can see, the filter is clogged with dirt. Now on to that damn trunnion.


Post# 830399 , Reply# 46   7/2/2015 at 01:34 (3,193 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Unbelievable amount of dirt in the outer tub.

 

20150702 022622

 

That cursed trunnion.

 

20150702 022622


Post# 830409 , Reply# 47   7/2/2015 at 04:22 (3,193 days old) by washdaddy (Baltimore)        

It's completely astounding when you see the insides of the outer tubs on washers the amount of dirt and crud that accumulates over time with the use of the machine and people think that everything is flushed away and clean when they use them. You would think the "ring around collar aka the inner tub & agitator" would give them a clue as to what lies in the unseen crevices and such.


Post# 830412 , Reply# 48   7/2/2015 at 05:15 (3,193 days old) by Chetlaham (United States)        
LOL

chetlaham's profile picture
Trust me, that's nothing. IVe seen some stuff Id rather not post.

Post# 830432 , Reply# 49   7/2/2015 at 07:48 (3,192 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
yeah, we all seen worse.....

but it doesn't stop there.....given anyone out there, you may wash dishes or your hands, taken a shower, and let the water run just until the sink is clean.....BUT, are you running enough water and cleaner to flush and clean the drain and pipes until they reach the septic/sewer....you don't realize it until you have to repair one, and open it up....

better so, when you see machines that have a 'ring around the tub' like a bathtub ring......and people don't seem to mind washing future loads in that scum without a thought to clean it.......


Post# 830471 , Reply# 50   7/2/2015 at 13:14 (3,192 days old) by Frigilux (The Minnesota Prairie)        

frigilux's profile picture
The gunk that hides unseen: This is why I chuckle a bit when people brag that they've never had to run a 'Clean Washer' cycle on their non-HE machines. They should take theirs apart and see what lurks beneath.

I'll gladly run a cleaning cycle every couple of months if it means avoiding what you uncovered in that Frigidaire, Louie.


Post# 830491 , Reply# 51   7/2/2015 at 14:31 (3,192 days old) by murando531 (Augusta, Georgia - US)        

murando531's profile picture
I've always done pseudo-clean cycles on every washer I've managed myself. Our Maytag Atlantis was always spotless because every couple of weeks I would fill it with an inch or so of hot water and use a cleaning rag, a toothbrush, and a toothpick to clean every nook and cranny I could get to. Afterwards I'd run a "hot" rinse with vinegar to break down any fabric softener and detergent scum. I can't stand the thought of washing my clothes in a dirty machine, and plus it's nice when anyone happens to glance into my machine and comment on how it looks brand new. When I took the Atlantis over to my in laws when their LG front-loader died, they couldn't believe it was bought in 2002.

With the Bravos, I'll run a Bulky cycle on warm water, set with a spray rinse, just to help flush away any crud in between deep cleanings. Although the washer keeps itself generally clean on its own, the higher water level obviously dissolves some residue because the water will sometimes have a bit of fizzy foam on top.


Post# 830529 , Reply# 52   7/2/2015 at 19:27 (3,192 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Stuck Basket Drive Block

combo52's profile picture

This part being stuck has little if anything to due with all the gunk. Aluminum parts assembled to steel parts that are underwater in washing machines can get very stuck in just a few years. Any GE TL washer built after 1995 can be just as hard to disassemble.

 

In any case since the plastic wash basket is out of the way you can now take a real torch to the aluminum basket drive block, heat it up and it will easily pull off.  However you may still need a new BDB, transmission and basket bearing assembly to do a decent repair or an indecent washer, LOL.

 

John L.


Post# 831923 , Reply# 53   7/12/2015 at 05:04 (3,183 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Waiting for a part. Haven't forgotten.


Post# 832447 , Reply# 54   7/15/2015 at 21:47 (3,179 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Well I got an extension hose for the propane torch. I heated up the trunnion and NADA. Didn't budge. I have a similar  idea that Yogi gave me using a car jack. I'm going to place the jack over the spin tube, I don't want to put it over the washer cabinet since it may warp. My question is, would putting a lot of downward pressure on the spin tube damage it or the tranny?


Post# 832560 , Reply# 55   7/16/2015 at 20:48 (3,178 days old) by Ultramatic (New York City)        
It's out!

ultramatic's profile picture

 

 

I decided to go with the time tested "bang, grunt and spray" method. Hit it with a hammer, pull, spray penetrating lube.

 

20150716 213259

20150716 213243

20150716 213409




This post was last edited 07/16/2015 at 23:39
Post# 832573 , Reply# 56   7/16/2015 at 23:36 (3,178 days old) by Frigilux (The Minnesota Prairie)        

frigilux's profile picture
Congratulations, Louie! Score one for brute force.💪

Post# 832585 , Reply# 57   7/17/2015 at 03:15 (3,178 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

The old tub seal. The rubber washer had disintegrated. This was the original small leak, not the flood I had the first time. That was caused by a a pressure hose that had fallen off.

 

20150716 233535


Post# 832586 , Reply# 58   7/17/2015 at 03:21 (3,178 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

New tub seal. A cinch to install.

 

20150716 234225

20150717 002707

20150717 005239

 Trunnion and tub reinstalled.

 

20150717 010930


Post# 832587 , Reply# 59   7/17/2015 at 03:24 (3,178 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Agitator and tub ring reinstalled.

 

20150717 021419

 

20150717 022642


Post# 832589 , Reply# 60   7/17/2015 at 03:43 (3,178 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Gave it a trial run. Runs smooth and very quiet. Underneath? Bone dry. Tomorrow I'll clean up the exterior, then a wash video. :)


Post# 832590 , Reply# 61   7/17/2015 at 03:46 (3,178 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Thanks Eugene!


Post# 832664 , Reply# 62   7/17/2015 at 22:16 (3,177 days old) by Lorainfurniture (Cleveland )        

Great job on the repair. I find that frigidaire washers are either a super easy fix (belt), or a real pia. I always admired how tough those machines are, despite the fact that they are not particularly good washers. I have a few stack frigidaire units in some of my rentals and they have been running well for many years.

If you ever want a job fixing appliances in Cleveland I'll hire you on the spot!


Post# 832668 , Reply# 63   7/17/2015 at 22:50 (3,177 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
nice job Louie....those machines seem simpler to fix than what they appear.....

Post# 832686 , Reply# 64   7/18/2015 at 06:24 (3,177 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Yay Louie

combo52's profile picture

You got it apart, back together and working, now you should tackle a 5YO SQ TLer, any TL GE washer built after 1994, a Norge, or even a compact WP World Washer for major repairs. All of the above washers can also be a major PIA for major tear-downs.

 

This is why DD WPs, GE FFs and two belt helical drive MT washers were usually the preferred machines by repair folks over the years.


Post# 832690 , Reply# 65   7/18/2015 at 07:32 (3,176 days old) by Frigilux (The Minnesota Prairie)        

frigilux's profile picture
Congratulations and huge cheers for you, Louie!

Now you can experience the joy of watching an indexing-tub machine at work. They love loads of mixed cottons, but don't particularly like sheets. Franklin-based machines will actually turn over a load well if just enough--but not too much--water is used. For all its faults, this Frigidaire will handle unbalanced loads like no other top-loader can.



Post# 832723 , Reply# 66   7/18/2015 at 10:54 (3,176 days old) by cuffs054 (MONTICELLO, GA)        

Ultra, I wish I had the guts to do tackle something like that! Your pix and explaination were great to see. I think I will miss my Kendaire version of your washer when the new house is ready (assuming I don't die of old age first). We have abused this washer for years with no problems. I don't hold the same thought about the new MT

Post# 832789 , Reply# 67   7/18/2015 at 23:50 (3,176 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Hey thanks guys for all the words of encouragement. While the repair itself was easy, tearing it down was another matter. Would I do it again? In a heartbeat. With each repair I hope to get faster and more proficient. It's funny, my dad said when he was doing this almost 40 years ago, I only showed mild interest. Better late than never. :)


Post# 832791 , Reply# 68   7/19/2015 at 00:11 (3,176 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Removed the lid. Yuk.

20150718 220137

 

That's better.

20150719 001355
 

Doing another  load.

20150719 001412

20150719 001754


Post# 832793 , Reply# 69   7/19/2015 at 00:23 (3,176 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Indeed, it does not like sheets too much, but washes them acceptably. Funny, I did a queen size comforter yesterday, and it did a nice job, turnover and all. It uses a FULL tub of water. As God intended.

 

20150719 003924

Never had a indexing tub before. I guess it adds to the drama, and you all know how we like drama in AW.  It washes well enough, but then again I'm not putting anything stained or heavily soiled into it yet. One nuisance is the fabric softener dispenser. The fabric softener has to be diluted with water, at least that's what the cap says.

 

Final images and video coming soon.

 

 




This post was last edited 07/19/2015 at 00:58
Post# 833212 , Reply# 70   7/22/2015 at 00:57 (3,173 days old) by Ultramatic (New York City)        
Finished!

ultramatic's profile picture

 

 

I think great grandad approves.

 

20150722 004146

20150722 004257
20150722 004202

20150722 004218


Post# 833213 , Reply# 71   7/22/2015 at 00:58 (3,173 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Video coming up!


Post# 833224 , Reply# 72   7/22/2015 at 03:39 (3,173 days old) by mrb627 (Buford, GA)        
Nice Job

mrb627's profile picture
She cleaned up very well.
The WCI machines usually run smoothly and quietly.
Good work!

Malcolm


Post# 835422 , Reply# 73   8/6/2015 at 17:18 (3,157 days old) by camMURRAY22 (Savannah,Georgia)        
Frigidaire Gallery Series Washer

One of White-Consolidated Industries. Agitator clicks and grunts very loud while coasting to a stop from the spin.

Post# 835887 , Reply# 74   8/10/2015 at 11:00 (3,153 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Thanks Malcolm!

 

Video is complete. I just need to edit it for length.


Post# 836723 , Reply# 75   8/15/2015 at 02:50 (3,149 days old) by Ultramatic (New York City)        
At long last....

ultramatic's profile picture

 

 




 




 





Post# 836741 , Reply# 76   8/15/2015 at 07:09 (3,148 days old) by washer111 ()        
Just Me, Or:

Is that painfully slow fill someone's idea of "saving energy?"

Skipped nearly 2 minutes in, and find it isn't even 1/4 full. If thats a hot wash, the water will be cold if it ever manages to fill up. LOL.

Funnily enough, the motor sounds like its "singing" a slow, and low version of the Nyan Cat :P
*AW.org users may need to be slightly loopy for this effect to work.

An interesting machine, nonetheless.


Post# 836742 , Reply# 77   8/15/2015 at 07:13 (3,148 days old) by Frigilux (The Minnesota Prairie)        

frigilux's profile picture
Up and running and looking great, Louie! I have such a soft spot for these Franklin-based washers.

Attaining maximum rollover with it requires using a precise amount of water. The load tends to simply whirl (albeit gracefully) around with the indexing tub when there's a lot of 'open' water. Experiment with it and you'll get really good at nailing the water level's sweet spot for any given load.

I'd forgotten how soon the spray rinse occurs in the first spin. Always liked that, as the clothes weren't plastered against the tub. It's a very effective little spray rinse.

Just for kicks, put it to the unbalanced load test. You'll be amazed at how well it handles unbalanced conditions. Beats every other top-loader hands down.

Thanks for posting the video; it was an enjoyable little blast-from-the-past. Now I miss my 2005, LOL!




This post was last edited 08/15/2015 at 07:43
Post# 836744 , Reply# 78   8/15/2015 at 07:43 (3,148 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

The washer is connected with only one hose to the wash basin's faucet and it's not exactly a small tub. So yeah, it was going to be a slow fill.


Post# 836746 , Reply# 79   8/15/2015 at 07:52 (3,148 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Glad you enjoyed it Eugene. That damn mat with the rubber backing just refused to be pulled in! LOL! The machine had a very "light" load compared to the water level. 4 t-shirts, 2 queen size sheets, 2 pillow cases and that blasted mat. It it weren't for that stuck trunnion, it would had been such a quick and easy fix. But hey, I learned, so a valuable experience. was had. Now to find it a happy home!


Post# 836747 , Reply# 80   8/15/2015 at 07:53 (3,148 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
Excellent job as always Louie......

yeah, many times a slow fill can be the result of a flow restrictor as well....

and some areas don't have great water pressure......if you think that's slow, I have a cousin who's machine can take up to 2+ hours to do a load, because of the low water pressure and its a Whirlpool belt drive....definitely not a place for a time fill machine.....


and true, finding water levels matching the load will give you a better wash action roll over...like any machine, you have to work within its best qualities..


Post# 836751 , Reply# 81   8/15/2015 at 08:23 (3,148 days old) by Murando531 (Augusta, Georgia - US)        

murando531's profile picture
That machine is gorgeous!!! I've always loved these WCI Frigidaire's despite what people say about them. And I'm glad you caught the start of the last spin after the drain. I always love hearing that distinct "ka-choooom" sound when the motor kicks on.

Post# 836774 , Reply# 82   8/15/2015 at 10:44 (3,148 days old) by Ultramatic (New York City)        

ultramatic's profile picture

 

 

Thanks Andrew! While it's here, I am using it to give the Maytag A107 a break. Love the second rinse option.



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy