|
Thread Number: 60191
/ Tag: Modern Automatic Washers
My Old Washing Machine WIE107 |
[Down to Last] |  |
| Post# 828567 6/19/2015 at 04:21 (3,226 days old) by IndesitLove107 (Russia) | ||
Hi all guys, I present my washer indesit WIE 107. My washer was purchased 7 years ago in 2007. And after 7 years it began to leak, the reason was the door seal. After replacing the door seal, the machine worked for another 4 months and after that buzzed the bearings in the drum. Unfortunately, my model is not collapsible drum and the cost of a new 200 euros, will to cut it the drum.
With regard to the dignity and disadvantages: Dignity: 1.Good washing. 2.There are a display. 3.1000 revolutions a minute. 4.There are programs for quick washing and sports clothes, namely TimeForYou and Sport. Disadvantages: 1.Noisy 2.Vibration | ||
|
| Post# 828620 , Reply# 1 6/19/2015 at 12:41 (3,226 days old) by Washerman250 (BLACKPOOL united kingdom) | ||
 | ||
| Post# 829052 , Reply# 3 6/22/2015 at 17:02 (3,223 days old) by robliverpool (england Liverpool) | ||
 | ||
| Post# 829134 , Reply# 4 6/23/2015 at 04:18 (3,222 days old) by paulc (Edinburgh, Scotland) | ||
 | ||
| Post# 842834 , Reply# 5 9/26/2015 at 03:04 (3,127 days old) by IndesitLove107 (Russia) | ||
|
| ||
| Post# 843727 , Reply# 6 10/1/2015 at 09:10 (3,122 days old) by AquaCycle (West Yorkshire, UK) | ||
 | ||
| Post# 843739 , Reply# 7 10/1/2015 at 11:31 (3,122 days old) by aquarius1984 (Planet earth) | ||
I know I bought this style of Indesit vented dryer in 2005 around May time after I got pissed off with the weather and only having a 1000 spin Hotpoint WF000 bought a month or so before.
I was ok with the 100 spin Zanussi quick n clean I had before as it spun so much better than the HPT hence the dryer being bought. | ||
| Post# 843740 , Reply# 8 10/1/2015 at 11:39 (3,122 days old) by hotpointfan (United Kingdom) | ||
2004 | ||
| Post# 900743 , Reply# 9 9/28/2016 at 02:36 (2,759 days old) by indesitLove107 (Russia) | ||
|
Indesit WIE107 before disassembly
The motor. I photographed under the washer. Visible carbon brushes and tachometr
View Full Size
| ||
| Post# 900745 , Reply# 10 9/28/2016 at 03:18 (2,759 days old) by indesitLove107 (Russia) | ||
|
The motor of the closed type of cap but my parents also Indesit only open, if water gets it will be short circuit, but it is very rarely burn out motors the washer.
View Full Size
| ||
| Post# 900750 , Reply# 11 9/28/2016 at 04:03 (2,759 days old) by brucelucenta () | ||
|
So what was the final outcome? Did you replace the machine when the bearings were going out or repair it? | ||
| Post# 900757 , Reply# 12 9/28/2016 at 05:28 (2,759 days old) by indesitLove107 (Russia) | ||
|
| ||
| Post# 901449 , Reply# 13 10/2/2016 at 00:05 (2,756 days old) by indesitLove107 (Russia) | ||
|
The motor collector between the two carbon brush
View Full Size
| ||
| Post# 901452 , Reply# 14 10/2/2016 at 02:26 (2,755 days old) by indesitLove107 (Russia) | ||
|
Is the drain pump.
View Full Size
| ||
| Post# 901456 , Reply# 15 10/2/2016 at 05:05 (2,755 days old) by indesitLove107 (Russia) | ||
|
On the rear cover inside the tub itself, pulley, electronic module, heater and motor.
View Full Size
| ||
| Post# 902452 , Reply# 16 10/10/2016 at 07:28 (2,747 days old) by indesitLove107 (Russia) | ||
|
The upper part of the washer.
View Full Size
| ||
| Post# 903466 , Reply# 17 10/18/2016 at 06:27 (2,739 days old) by indesitLove107 (Russia) | ||
|
Indesit WIE 107. The sizes of the bearings and seal. Bearings: 6202, 6203 Seal: 22x40x10/11,5
View Full Size
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}