Thread Number: 60326
/ Tag: Modern Automatic Washers
Neptune Bangs on final spin |
[Down to Last] |
Post# 829963   6/28/2015 at 16:25 (3,223 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
|
Post# 830550 , Reply# 1   7/3/2015 at 02:40 (3,219 days old) by redcarpetdrew (Fairfield, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 830555 , Reply# 2   7/3/2015 at 05:14 (3,219 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
Post# 830572 , Reply# 3   7/3/2015 at 08:53 (3,219 days old) by Yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
Drew....Jerry has a stacked setup......
can't recall exactly, but willing to bet you have to remove both front and rear panels for access, leaning more towards the front one....you may even have to tilt the machine as I think they are bolted from the bottom... there was another member here who replaced struts from a banging machine, but that didn't seem to solve his problem.... let us know how you make out..... |
Post# 830582 , Reply# 4   7/3/2015 at 09:59 (3,219 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
Post# 830584 , Reply# 5   7/3/2015 at 10:03 (3,219 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|
Post# 830586 , Reply# 6   7/3/2015 at 10:20 (3,219 days old) by moparwash (Pittsburgh,PA )   |   | |
This post has been removed by the member who posted it. |
Post# 830587 , Reply# 7   7/3/2015 at 10:32 (3,219 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
Post# 830605 , Reply# 8   7/3/2015 at 16:08 (3,218 days old) by redcarpetdrew (Fairfield, CA)   |   | |
Checkrate/Likes
 
     
|