Thread Number: 66211
/ Tag: Modern Dishwashers
WP/KM DW melted rinse aid plug |
[Down to Last] |
Post# 888070   7/4/2016 at 11:33 (2,851 days old) by PeterH770 (Marietta, GA)   |   | |
Checkrate/Likes
 
     
See pic. Just found this rinse aid plug on a friend's dw. Is the water too hot or is the solenoid going bad? Any advice appreciated!
View Full Size
|
|
Post# 888089 , Reply# 1   7/4/2016 at 14:59 (2,851 days old) by vacerator (Macomb, Michigan)   |   | |
Checkrate/Likes
 
1    
it looks to have not been locked in the closed position, fell off and onto the heating element, or under it, and got melted during drying. |
Post# 888096 , Reply# 2   7/4/2016 at 16:13 (2,851 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|
Post# 888098 , Reply# 3   7/4/2016 at 16:20 (2,851 days old) by mark_wpduet (Lexington KY)   |   | |
Checkrate/Likes
 
     
|
Post# 888117 , Reply# 4   7/4/2016 at 19:35 (2,851 days old) by vacerator (Macomb, Michigan)   |   | |
Checkrate/Likes
 
     
The solenoid is behind the inner door panel and dispenser fill cap of course, right? |
Post# 888250 , Reply# 5   7/5/2016 at 13:09 (2,850 days old) by PeterH770 (Marietta, GA)   |   | |
Checkrate/Likes
 
     
|