|
Thread Number: 69558
/ Tag: Vintage Dishwashers
Stainless Steel Panels for a KDI-18 |
[Down to Last] |  |
| Post# 924556 3/2/2017 at 20:49 (2,608 days old) by jarader (Wadena, MN) | ||
|
We have a KDI-18 dishwasher, are there stainless steel panels available for this and if so where can I find them. | ||
|
| Post# 924572 , Reply# 1 3/2/2017 at 22:36 (2,608 days old) by Michaelman2 (Lauderdale by the Sea, FL) | ||
|
jarader,
If you do not find a set on Ebay or here, you can easily have them fabricated at a stainless steel fabricator by giving the fabricator the measurements and they will easily be able to create a set for you to place inside the brackets. | ||
| Post# 924963 , Reply# 2 3/4/2017 at 19:12 (2,607 days old) by Blackstone (Springfield, Massachusetts) | ||
 | ||
Post# 924964 , Reply# 3 3/4/2017 at 19:18 (2,607 days old) by Chachp  (North Little Rock, AR) |
||
b-241677  | ||
| Post# 925102 , Reply# 4 3/5/2017 at 10:30 (2,606 days old) by Blackstone (Springfield, Massachusetts) | ||
|
| ||
| Post# 927518 , Reply# 5 3/17/2017 at 21:12 (2,593 days old) by nosnooz (Lowell, MI) | ||
|
I picked up these (link below). They cut the panels to your dimensions. They are made of 22 gauge SS so they're a bit thicker than OEM panels. They came well packaged and in three days. CLICK HERE TO GO TO nosnooz's LINK
View Full Size
| ||
| Post# 927519 , Reply# 6 3/17/2017 at 21:17 (2,593 days old) by duke () | ||
|
Beautiful!! | ||
|
Post# 927562 , Reply# 7 3/18/2017 at 05:33 (2,593 days old) by chachp (North Little Rock, AR) |
||
|
Very nice! | ||
| Post# 929093 , Reply# 8 3/26/2017 at 17:08 (2,585 days old) by jarader (Wadena, MN) | ||
|
Our dishwasher does not have the framepieces that go around the edges to hold that in place. | ||
| Post# 929167 , Reply# 9 3/27/2017 at 08:15 (2,584 days old) by PhilR (Quebec Canada) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
