Thread Number: 69840  /  Tag: Modern Dishwashers
My Miele G2150 Dishwasher Has a Screw Loose
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items
Post# 927771   3/19/2017 at 15:27 (268 days old) by rp2813 (The Big Blue Bubble)        

rp2813's profile picture

Make that two.

 

This morning I decided to clean the filter on my Miele Diamante after emptying it of last night's load.  As I placed the whole assembly into the sink, the bottom popped open from the inner filter cover and two mismatched screws fell out. 

 

I made a visual check to see if there were other screws like them, but found zero screws fastening anything on the interior of the machine.

 

I have no idea where these screws came from.  Meanwhile, the machine is operating normally and there are no leaks.  Any suggestions on the possible purpose of these two screws would be appreciated.  They're both a little less than 1" long.  It looks like they've been swirling around in the filter assembly for quite some time.

 

 


  Photos...       <              >      Photo 1 of 2         View Full Size



Post# 927774 , Reply# 1   3/19/2017 at 15:33 (268 days old) by nmassman44 (Boston North Shore Massachusetts)        

nmassman44's profile picture
Have you checked any handles your pots and pans that might be loose? I know I have a couple of pots that have plastic handles that are attached by screws like the ones you show here. I had that blessed event happen to me once with a Whirlpool PowerClean dishwasher that I had back in the 90's and I had to take the pump apart to find the screws which were at the bottom where the seal and platform area was for the pump. It didnt get into the grinder or sizing plate but I wanted to make sure I would have an issue later on.

Post# 927780 , Reply# 2   3/19/2017 at 16:53 (268 days old) by rp2813 (The Big Blue Bubble)        

rp2813's profile picture

Mike, I thought of that, but all cookware I use regularly is intact.  I'm going to think about this for a while to see if I remember running anything through the machine in recent months that would have had screws holding it together.   Considering they're mismatched, maybe they weren't original to whatever they had been attached to.


Post# 927782 , Reply# 3   3/19/2017 at 17:05 (268 days old) by foraloysius (Groningen, the Netherlands)        

foraloysius's profile picture
Did you perhaps keep a few screws in a mug or so and forgot about it, put the mug in the dishwasher?

Post# 927783 , Reply# 4   3/19/2017 at 17:13 (268 days old) by rp2813 (The Big Blue Bubble)        

rp2813's profile picture

Louis, that is a distinct possibility!   You have triggered a vague memory of hearing something hit the bottom of the tub upon loading, but not being able to find anything when I looked.

 

I think I'm going to run with your theory and stop worrying about this.


Post# 927803 , Reply# 5   3/19/2017 at 21:08 (268 days old) by brisnat81 (Brisbane Australia)        

All of the screws on the Miele dishwashers are Torx headed, so they definitely didnt come from the machine itself.

Post# 927844 , Reply# 6   3/20/2017 at 00:35 (267 days old) by rp2813 (The Big Blue Bubble)        

rp2813's profile picture

Thanks Nathan, that's good to know.  I'm pretty sure the scenario Louis suggested is how the screws ended up where they did. 





Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy