|
Thread Number: 70944
/ Tag: Modern Automatic Washers
VMW shredding laundry? |
[Down to Last] |  |
|
|
Post# 939338 , Reply# 1 5/19/2017 at 07:28 by gansky1  (Omaha, The Home of the TV Dinner!) |
||
 | ||
| Post# 939342 , Reply# 2 5/19/2017 at 08:18 by Wishwash (Illinois) | ||
|
There are none that I can find in the washer or dryer. The set is like new. | ||
| Post# 939356 , Reply# 3 5/19/2017 at 11:37 by chetlaham (United States) | ||
|
I have a suspicion... Can you post the model #? | ||
| Post# 939392 , Reply# 4 5/19/2017 at 15:26 by Rolls_rapide (Scotland, UK) | ||
Check the perforated drum for little burrs on the metal finish, using a material that's easily 'pooked', such as a pair of old tights/pantyhose/stockings, etc.
Two of the machines I have had, had this very issue. I had to use very fine-grade emery paper to rub the burrs down. One of the machines had a drum weld on the drum inner surface, which was pretty rough to be next to delicate clothes. The burrs can be very small indeed. | ||
| Post# 939402 , Reply# 5 5/19/2017 at 16:22 by wishwash (Illinois) | ||
|
Its a Kenmore 110.20022013, I will look over the basket more carefully this time for any burrs. | ||
| Post# 939597 , Reply# 7 5/21/2017 at 05:43 by mrb627 (Buford, GA) | ||
Model? | ||
| Post# 939634 , Reply# 8 5/21/2017 at 08:20 by Wishwash (Illinois) | ||
|
Nope, this is one of the early models. No agitation during fill - it has true water levels. | ||
|
|
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
