|
Thread Number: 75598
/ Tag: Vintage Automatic Washers
Hoover Logic A8534 Capacity? |
[Down to Last] |  |
| Post# 994215 5/15/2018 at 01:00 (2,167 days old) by Electron1100 (England) | ||
 | ||
|
Post# 994343 , Reply# 2 5/16/2018 at 06:45 (2,166 days old) by Launderess  (Quiet Please, There´s a Lady on Stage) |
||
May have it wrong | ||
| Post# 994375 , Reply# 3 5/16/2018 at 13:38 (2,165 days old) by keymatic3203 (Cardiff UK) | ||
|
Hi Gary according to the service/parts book, that's a logic 1300 washer dryer with a 5kg load, the drums are about 4cm deeper than the 4.5kg drums. I measured one for you on the weekend. Mathew | ||
| Post# 994378 , Reply# 4 5/16/2018 at 14:14 (2,165 days old) by Electron1100 (England) | ||
|
How Big Is It
Thanks to all who replied, it is too big.......dam and dam again.
I have been looking for a suitable drum for a Hoover 1100 either the early roller bearing type of the later ball bearing type, I think mine is dying as there appears to wear on the spider shaft, I just want to swap it out as I and a certain engineer from Cardiff are sick of changing the bearings and tubdrum seal, I suppose 35 years is a good life (he said grudgingly) Gary | ||
| Post# 994388 , Reply# 5 5/16/2018 at 18:32 (2,165 days old) by optima (Cumbria England) | ||
A8564 | ||
| Post# 994448 , Reply# 6 5/17/2018 at 13:43 (2,164 days old) by Electron1100 (England) | ||
|
The Shame | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
