|
Thread Number: 11310
Door Boots or seals in uk |
[Down to Last] |  |
Post# 203318 4/12/2007 at 05:20 (6,218 days old) by ricky5050  (Durham Britain) |
||
Hi john jetcone kindly told me that door boots or seals for my bendix washer dryer are still available in the UK. ( see combos thread )Can anyone tell me where? as it would be prudent to get a a spare one, Mike he mentioned seeing your machine , do you know? also does anyone know where to get felt that makes a hula hoop shaped seal for an english electric dryer as i have one that needs one Many thanks Richard Ps i hope its ok to use your image paul as mine is in the garage mine is the machine on the left
| ||
|
| Post# 203383 , Reply# 1 4/12/2007 at 13:01 (6,217 days old) by seamusuk (Dover Kent UK) | ||
Maybe.....
Hey Ricky The earliest I can find listed is for a Bendix 7122/Philco W20- unfortunatly I cant send you the pic as our suppliers website wont let me save it :(. The supplier is Hrs(Electruepart) in Birmingham and their part # is Gsk549. If you cant find anyone local who can order I could send ya one ;). Regarding the felt seal im guessing its the one round the front of the drum?? Seamus | ||
|
Post# 203434 , Reply# 2 4/12/2007 at 16:09 (6,217 days old) by ricky5050 (Durham Britain) |
||
|
yes
Hi Seamus jon jetcone has given me an address with details so i have ordered a seal as spare just in case i need one, as regards the felt seal it is the front one, my machine has two but the front one has perished and the spring holding it has become tangled, if i could get some felt 2 inch wide and stitched it i think i could make one , unless you know where one could be sourced, did you keep that dryer you found? Richard
| ||
|
Post# 203570 , Reply# 3 4/13/2007 at 04:20 (6,217 days old) by chestermikeuk (Rainhill *Home of the RailwayTrials* Merseyside,UK) |
||
Boots n Felts
Hi Richard Following Jon Jetcones visit here last time, we started to look at sources for the Bendix boots, Homespare, Electrupart & Qualtex we tried, Qualtex is the best, much thicker, its is a DBT07, models 7128, 7147 early etc, you need which is the "Early & Deep" boot, as opposed to the DBT31 which needs some trimming to make it fit...I`ve just set up a trade account with Qualtex so let me know when you need stuff... I`ve not had a chance to look at the felt bearing on the Hoover dryer, it is working fine, but that felt idea seems great, also I think the Maytag dryers use a similar felt roller???help me out here anybody, which might provide another source of spares either from the States or Commercial Laundry spares here in UK......Cheers, Mike Heres Jon servicing Bertha Bendix, CLICK HERE TO GO TO chestermikeuk's LINK 
| ||
|
Post# 203599 , Reply# 4 4/13/2007 at 08:13 (6,216 days old) by peteski50 (New York) |
||
Video | ||
|
Post# 203647 , Reply# 5 4/13/2007 at 10:44 (6,216 days old) by ricky5050 (Durham Britain) |
||
|
Thanks Mike! | ||
|
Post# 203788 , Reply# 6 4/13/2007 at 21:59 (6,216 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers) |
||
Hey Mike | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
