Thread Number: 11940
John E was RIGHT! LIPS FOR DAYS! |
[Down to Last] |
Post# 211802   5/23/2007 at 08:15 (6,181 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
John had told me the early Bendix boots were different and he is correct. I actually like the earlier boots better as they make a larger opening but the later boots with the LIP that snags everything actually helps stop the infamous "BendixDoorDrip" that plagued the machine. But we can't all eat salad all the time, so to have new boots that work is just fine with me even if they come with snaggle lips! See the photographic evidence below and enjoy! |
|
Post# 211803 , Reply# 1   5/23/2007 at 08:19 (6,181 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
|
Post# 211804 , Reply# 2   5/23/2007 at 08:21 (6,181 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
|
Post# 211816 , Reply# 3   5/23/2007 at 09:19 (6,181 days old) by laundromat (Hilo, Hawaii)   |   | |
Checkrate/Likes
 
     
|
Post# 211837 , Reply# 4   5/23/2007 at 10:44 (6,181 days old) by maytagbear (N.E. Ohio)   |   | |
Checkrate/Likes
 
     
This is interesting about how a small change can make a big difference. About salads, I think I shouldn't say! Lawrence/Maytagbear |
Post# 211986 , Reply# 5   5/24/2007 at 08:59 (6,180 days old) by gansky1 (Omaha, The Home of the TV Dinner!)   |   | |
Checkrate/Likes
 
     
|
Post# 212014 , Reply# 6   5/24/2007 at 11:56 (6,180 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
|
Post# 212016 , Reply# 7   5/24/2007 at 11:58 (6,180 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
|
Post# 212025 , Reply# 8   5/24/2007 at 15:01 (6,180 days old) by gansky1 (Omaha, The Home of the TV Dinner!)   |   | |
Checkrate/Likes
 
     
|
Post# 212078 , Reply# 9   5/24/2007 at 21:37 (6,179 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
I measured tonight! They ARE different sizes on the stampings on the cabinets to my HUGE surprise! The 1955 machine is 11 3/8 from roll to roll. The 1958 machine is 11 3/4 from roll to roll.! The new boots don't fit the older machines I tried on one tonight! I know that to change those stampings cost alot of money even back then. And to boot ( no pun intended) because of the boot style the older machine actually has a larger opening for loading and unloading. It's funny as I did find another Bendix boot that was for "older" bendix in the parts literature over in England so I ordered one this time around along with the other boots just to see what the difference might be. They haven't arrived yet but when they do its going straight down to the basement to the 1955 machine!!! How could they!! |
Post# 212155 , Reply# 10   5/25/2007 at 08:22 (6,179 days old) by unimatic1140 (Minneapolis)   |   | |
Checkrate/Likes
 
     
|