|
Thread Number: 18419
Frigidaire Alert!!!! |
[Down to Last] |  |
| Post# 298997 8/24/2008 at 20:03 (5,716 days old) by qsd-dan (West) | ||
 | ||
|
| Post# 299001 , Reply# 1 8/24/2008 at 20:39 (5,716 days old) by laundromat (Hilo, Hawaii) | ||
asking seller a question
yall know I live in houston and maybe,just maybe,I'll be able to get these.It's been a while since I had that washer.I had one similar and think it was more likew the dryer.it was a Super model not Imperial.i am not sure whether this unit has the Unimatic or Pulsamatic trans.The one I had had the Pulsamatic and didn't have the Rapidry spin.
| ||
Post# 299003 , Reply# 2 8/24/2008 at 20:42 (5,716 days old) by unimatic1140  (Minneapolis) |
||
 | ||
|
Post# 299004 , Reply# 3 8/24/2008 at 20:43 (5,716 days old) by swestoyz (Cedar Falls, IA) |
||
 | ||
|
Post# 299016 , Reply# 4 8/24/2008 at 21:02 (5,716 days old) by gansky1 (Omaha, The Home of the TV Dinner!) |
||
 | ||
|
Post# 299030 , Reply# 5 8/24/2008 at 21:44 (5,716 days old) by appnut (TX) |
||
 | ||
| Post# 299041 , Reply# 6 8/24/2008 at 22:34 (5,716 days old) by tuthill () | ||
|
Go get it Bob! | ||
|
Post# 299078 , Reply# 7 8/25/2008 at 07:44 (5,715 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers) |
||
dime size hole | ||
| Post# 299092 , Reply# 8 8/25/2008 at 09:48 (5,715 days old) by peterh770 (Marietta, GA) | ||
 | ||
|
Post# 299971 , Reply# 9 8/29/2008 at 03:38 (5,712 days old) by trainguy (Key West, FL) |
||
So..... | ||
|
Post# 299994 , Reply# 10 8/29/2008 at 07:30 (5,711 days old) by swestoyz (Cedar Falls, IA) |
||
|
| ||
| Post# 300047 , Reply# 11 8/29/2008 at 13:30 (5,711 days old) by tuthill () | ||
|
Since they can't sell them, I just asked them if they'd be willing to ship... I wouldn't mind having the "ugly duckling" Unimatic LoL! | ||
| Post# 300153 , Reply# 12 8/29/2008 at 23:00 (5,711 days old) by tuthill () | ||
| ||
| Post# 300154 , Reply# 13 8/29/2008 at 23:01 (5,711 days old) by tuthill () | ||
| ||
| Post# 300155 , Reply# 14 8/29/2008 at 23:02 (5,711 days old) by tuthill () | ||
| ||
| Post# 300156 , Reply# 15 8/29/2008 at 23:07 (5,711 days old) by tuthill () | ||
| ||
| Post# 300158 , Reply# 16 8/29/2008 at 23:15 (5,711 days old) by tuthill () | ||
| ||
| Post# 300160 , Reply# 17 8/29/2008 at 23:59 (5,711 days old) by rickr (.) | ||
Nice pixs! Isn't that odd how the outer tub looks spotless, but the spin tub is rusted through?? I have seen them rusted at the brace area on the sides of the spin tub where the braces were spot welded, then collect loose strings, or at the balance ring, but not right at the bottom like that! At any rate, it is a very nice looking machine, and the tub is repairable. Good luck dude!! <:
| ||
| Post# 300460 , Reply# 18 8/31/2008 at 17:43 (5,709 days old) by tuthill () | ||
|
Congrats Ben! | ||
| Post# 300462 , Reply# 19 8/31/2008 at 17:57 (5,709 days old) by travis () | ||
|
Ben got new toys! Now I don't feel so bad for having so much stuff. Good luck with them Ben. | ||
| Post# 300470 , Reply# 20 8/31/2008 at 20:15 (5,709 days old) by rickr (.) | ||
|
| ||
|
Post# 300472 , Reply# 21 8/31/2008 at 20:44 (5,709 days old) by swestoyz (Cedar Falls, IA) |
||
|
Thanks for the congrats guys! Will be making a call to Bobbie @ YouCrate on Tuesday. Weather pending, I suspect we'll be seeing yet another Unimatic in Iowa hopefully next week! Of course, many pictures to follow. Thinking of different ways to plug that hole, with class. Some grey POR-15 for the finish. Piece of metal - or an epoxy-based paste? Ben 
| ||
|
Post# 300511 , Reply# 22 8/31/2008 at 21:46 (5,709 days old) by appnut (TX) |
||
|
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
