Thread Number: 18488
Parts for Frigidaire WC-6 (1-18) Washer
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 300022   8/29/2008 at 10:29 (5,717 days old) by mnerg ()        

I'm trying to restore/revive an old Frigidaire WC-6 washer and can't find a few key parts for the water pump. I've searched high and low with no luck - the two parts I need most are # 5301126272 (impeller seal retainer) and #5300635232 (seal seat and gasket). Does anyone have any suggestions, or have an old machine that you'd be willing to part-out (or even sell as a whole)? I'm desperate to get her going again and very much appreciate any help that you could provide!!




Post# 300037 , Reply# 1   8/29/2008 at 12:58 (5,717 days old) by joelippard (Hickory)        
Re:

joelippard's profile picture
Contact Stone Parts at 1-800-777-4626. They have microfish they can reference for the older part numbers and may possibly have a new pump in NOS.

Post# 300072 , Reply# 2   8/29/2008 at 15:48 (5,717 days old) by mnerg ()        

Thanks for the info, Joe - I will give them a call.

Post# 300219 , Reply# 3   8/30/2008 at 11:03 (5,716 days old) by trainguy (Key West, FL)        

trainguy's profile picture
I should have what you need. Let me do some checking.

Post# 300754 , Reply# 4   9/2/2008 at 06:15 (5,713 days old) by christfr (st louis mo)        

christfr's profile picture
hey rich well if your diggin for 1-18 parts down her in st louis we need an outer tub seal.. if you can dig one of those up id be more than happy to buy one

Post# 301026 , Reply# 5   9/3/2008 at 03:35 (5,712 days old) by trainguy (Key West, FL)        
I'm still digging.....

trainguy's profile picture
but making progress for both of you.

Post# 301066 , Reply# 6   9/3/2008 at 10:08 (5,712 days old) by pdub (Portland, Oregon)        
Rich,

pdub's profile picture
I also am looking for a tub seal and a lower bearing for a 1-18. I sent an email to the address in your profile.

thanks- Patrick


Post# 301791 , Reply# 7   9/6/2008 at 08:11 (5,709 days old) by trainguy (Key West, FL)        
I'm Home This Weekend.....

trainguy's profile picture
and I'll be going to the warehouse in a few hours. I'll spend time Sunday during the Steelers' game hunting up the above mentioned parts. I've received 10 emails for parts. I can't promise I'll fill everyone's request tomorrow, but I'll do my very best.

Leon, this includes yours, too!

Rich

BTW.....where are all of the local Pittsburgh members? I hear from Randy, Mike and David, but what about the rest of you?


Post# 301794 , Reply# 8   9/6/2008 at 08:25 (5,709 days old) by mayfan69 (Brisbane Queensland Australia)        
Thanks Rich

mayfan69's profile picture
Hi Rich,

Any assistance will always be appreciated.

Leon


Post# 301890 , Reply# 9   9/6/2008 at 18:21 (5,709 days old) by trainguy (Key West, FL)        
Patrick

trainguy's profile picture
which do you need:

1) 636633 Lower mechanism support bearing, or
2) 634726 Lower drive shaft bearing

Rich


Post# 302116 , Reply# 10   9/8/2008 at 01:05 (5,707 days old) by pdub (Portland, Oregon)        
Rich

pdub's profile picture
Probably both. I have 633162 which is the upper.

Patrick



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy