|
Thread Number: 19229
Maytag Orbital / Whirlpool DD hybrid |
[Down to Last] |  |
Post# 310121 10/18/2008 at 22:39 (5,667 days old) by pulsator  (Saint Joseph, MI) |
||
I know there were plans awhile back to make a Whirlpool/Maytag hybrid... Is this it? There aren't enough pictures to determine, this may be an out of date picture too, but it's listed only on the Maytag commercial laundry website... It says beltless and it's one of the few not listed as discontinued!
CLICK HERE TO GO TO pulsator's LINK | ||
|
| Post# 310127 , Reply# 1 10/19/2008 at 00:06 (5,667 days old) by roto204 (Tucson, AZ) | ||
Hmm | ||
|
Post# 310129 , Reply# 2 10/19/2008 at 00:12 (5,667 days old) by pulsator (Saint Joseph, MI) |
||
|
| ||
| Post# 311855 , Reply# 3 10/27/2008 at 19:31 (5,658 days old) by xyz () | ||
|
Look and you will see another thing that is Maytag...the screws on the bottom of the front. But one could see that such an access panel could also work on a DD Whirlpool. This all depends on how you go about changing motors and pumps on Whirlpools. I see no prob. | ||
| Post# 311918 , Reply# 4 10/28/2008 at 07:39 (5,658 days old) by peterh770 (Marietta, GA) | ||
 | ||
| Post# 312148 , Reply# 5 10/29/2008 at 11:31 (5,657 days old) by xyz () | ||
|
I will be so glad when some of these machines trickle down to repair shops such as mine. Ready to disect. | ||
| Post# 312199 , Reply# 6 10/29/2008 at 15:51 (5,657 days old) by redcarpetdrew (Fairfield, CA) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
