|
Thread Number: 20676
Bosch Dispenser Issue |
[Down to Last] |  |
Post# 328201 2/1/2009 at 20:51 (5,555 days old) by pulsator  (Saint Joseph, MI) |
||
My Bosch frontloader has been dispensing the fabric softener at the wrong time lately, it seems to be dispensing during a spin, I'm not sure which, but it always puts some water in the FS dispenser whenever it fills, it didn't used to do this... Any ideas? Is it a fill valve issue? A computer issue? A diverter issue in the dispenser itself? It's the washer on the bottom left... 
| ||
|
| Post# 328250 , Reply# 1 2/1/2009 at 23:56 (5,555 days old) by ronhic (Canberra, Australia) | ||
Have you......
...opened the drawer whilst filling? You should be able to open it at least 50% of its reach without any issues and you may be able to see what is actually happening. Then I would suggest that you remove the drawer and clean the inlet holes above each chamber with an toothbrush. It is possible that something has managed to get in there and could be causing the water to 'not go where aimed'.... | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
