|
Thread Number: 21386
Hotpoint 18680 at work |
[Down to Last] |  |
| Post# 337016 3/23/2009 at 09:35 (5,506 days old) by hotpoint95622 (Powys) | ||
 | ||
|
| Post# 337017 , Reply# 1 3/23/2009 at 09:36 (5,506 days old) by hotpoint95622 (Powys) | ||
|
Hotpoint 18680 | ||
| Post# 337019 , Reply# 2 3/23/2009 at 09:38 (5,506 days old) by hotpoint95622 (Powys) | ||
|
Hotpoint 18680 | ||
| Post# 337022 , Reply# 3 3/23/2009 at 09:46 (5,506 days old) by hotpoint95622 (Powys) | ||
|
Hotpoint 18680 | ||
| Post# 337025 , Reply# 4 3/23/2009 at 09:48 (5,506 days old) by hotpoint95622 (Powys) | ||
|
Hotpoint 18680 | ||
| Post# 337028 , Reply# 5 3/23/2009 at 09:53 (5,506 days old) by hotpoint95622 (Powys) | ||
|
Hotpoint 18680 | ||
| Post# 337031 , Reply# 6 3/23/2009 at 10:23 (5,506 days old) by hotpoint95622 (Powys) | ||
|
Hotpoint 18680 | ||
Post# 337076 , Reply# 8 3/23/2009 at 15:30 (5,506 days old) by chestermikeuk  (Rainhill *Home of the RailwayTrials* Merseyside,UK) |
||
Hotpoint | ||
| Post# 337204 , Reply# 10 3/24/2009 at 04:14 (5,505 days old) by hotpoint95622 (Powys) | ||
|
Now back to the project
It’ back to the electronics project I’ve started. Don’t do dryers as never had one, cost toooo much to run and would have to have it going could not just look at it, I would make one exception for a 50’s flatly. Biggest job of all is keeping all 3 safe, not from the skip but in general as the garage is not the best place, they will get knocked and dented so will have to be careful and keep an eye for the dreaded rust. I’ve fitted some din rail for the relays to the back cover by the pump so it wiring time, still not sure about the connections on the speed module I have, so it will have to be trial and error work which might end with a bang!! 
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
